Follett Horizon Elite Chewblet HCD1010RPS 매뉴얼 - 페이지 3
{카테고리_이름} Follett Horizon Elite Chewblet HCD1010RPS에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Follett Horizon Elite Chewblet HCD1010RPS 8 페이지.
Follett Horizon Elite Chewblet HCD1010RPS에 대해서도 마찬가지입니다: 매뉴얼 (8 페이지)
페이지 인쇄
Dimensional drawing
1010/1410 single phase
D1
Specification, condenser unit
W1 Width
D1 Depth
H1 Height
Electrical
Operating power
Minimum circuit ampacity
Maximum overcurrent protection
Outdoor condensing unit operating limits
(air temperature)
Maximum refrigerant line run length
Maximum line rise above evaporator
Evaporator mounting above condenser
Maximum refrigeration line drop without oil trap
Refrigerant charge
Approximate ship weight
Approximate net weight
NOTE:
1. The entire liquid line should be insulated separately from the suction line.
Remote 1010, 1410 series ice machine
1010 three phase
D1
W1
H1
Horizon Elite 1010 series
39.90" (101 cm) – single phase
36.25" (91.4 cm) – three phase
28.50" (72.4 cm) – single phase
25.50" (64.8 cm) – three phase
21.50" (54.6 cm) – single phase
26.10" (66.3 cm) – three phase
208-230/60/1 – single phase
208-230/60/3 – three phase
1.46 kW – single phase
2.2 kW – three phase
10.6 A – single phase
9.9 A – three phase
15 A – single phase
15 A – three phase
min -20 F (-29 C)
max 120 F (49 C)
100' (30.5 m)
35' (10.7 m)
15' (4.6 m)
15' (4.6 m)
12 lb – single phase
12.5 lb – three phase
required at installation
212 lb (96 kg) – single phase
260 lb (118 kg) – three phase
180 lb (82 kg) – single phase
250 lb (114 kg) – three phase
D1
W1
H1
Horizon Elite 1410 series
39.90" (101 cm) – single phase
37.75" (95.9 cm) – three phase
28.50" (72.4 cm) – single phase
28.25" (71.6 cm) – three phase
21.50" (54.6 cm) – single phase
19.75" (50.2 cm) – three phase
208-230/60/1 – single phase
208-230/60/3 – three phase
2.2 kW – single phase
3.0 kW – three phase
16.4 A – single phase
15 A – three phase
25 A – single phase
20 A – three phase
min -20 F (-29 C)
max 120 F (49 C)
100' (30.5 m)
35' (10.7 m)
15' (4.6 m)
15' (4.6 m)
12 lb – single phase
10 lb – three phase
required at installation
234 lb (106 kg) – single phase
230 lb (104 kg) – three phase
202 lb (92 kg) – single phase
210 lb (95 kg) – three phase
1410 three phase
W1
H1
3
Form# 7035