Follett Horizon Elite Chewblet HCF1010RBS 설치 지침 매뉴얼 - 페이지 6
{카테고리_이름} Follett Horizon Elite Chewblet HCF1010RBS에 대한 설치 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Follett Horizon Elite Chewblet HCF1010RBS 16 페이지. For drop-ins
Follett Horizon Elite Chewblet HCF1010RBS에 대해서도 마찬가지입니다: 설치 지침 매뉴얼 (17 페이지)
페이지 인쇄
Prepare the bin.
3.1
Bin top preparation
C L
• Locate center of bin top
• Cut 3" (77,2 mm) diameter hole in bin top
3.3
Bin top preparation
• Apply gaskets
➊
• Install shuttle actuator
bin and secure with locking nut
6
3" ∅
(76,2mm)
C L
➋
through top of
➌
remote condensing
Bin preparation
3.2
Bin top preparation
• Remove protective tape from
gaskets
BEFORE PROCEEDING
Prior to installing the docking assembly,
ensure that the drain fitting is oriented (right
or left) correctly for your installation. An
optional straight drain fitting is also supplied.
You may need to remove the back panel of
the docking assembly in order to re-orient or
change the drain fitting. Replace back panel
prior to mounting the docking assembly.
BIN • RIDE Technology
3