Follett Horizon Elite HCC1010AJS 설치 지침 매뉴얼 - 페이지 13
{카테고리_이름} Follett Horizon Elite HCC1010AJS에 대한 설치 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Follett Horizon Elite HCC1010AJS 17 페이지. For drop-in
Follett Horizon Elite HCC1010AJS에 대해서도 마찬가지입니다: 매뉴얼 (8 페이지), 설치 지침 매뉴얼 (17 페이지)
페이지 인쇄
Water-cooled ice machines – follow steps 7.6 through 7.12.
7.5
TDS switch
• Set the TDS switch on the electrical box:
HIGH: for extended service life
LOW: for low-scale water
7.7
Ice transport tube
➋
• Slide ice machine into docking assembly
ensuring that drain tube is fully seated on
barbed drain fitting
• Insert ice transport tube into coupling and
➋
tighten nut firmly
DROP-IN • RIDE Technology
TDS
HIGH
CLEAN
LOW
➊
➊
self-contained
7.6
Cooling lines
• Install ice machine cooling water lines to
docking assembly
7.8
Water solenoid, shut-off valve,
and potable water line options
If water solenoid is already mounted to
evaporator:
• Insert potable water line into shut-off valve.
If this is an undercounter installation:
• Mount water solenoid atop evaporator and
locate the shut-off valve inside the machine.
Insert potable water line into shut-off valve.
If water solenoid is not mounted and
machine will not be installed under-
counter:
• Mount water solenoid to inside rear (upper
right corner) of docking assembly using one
screw.
• Insert potable water line into shut-off valve -
locate the shut-off valve outside the machine.
•
Insert outgoing line from shut-off valve into
push-in connection of water solenoid.
In
Out
13