Caraudio-Systems c.LOGiC C2-E65-TV 매뉴얼 - 페이지 5
{카테고리_이름} Caraudio-Systems c.LOGiC C2-E65-TV에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Caraudio-Systems c.LOGiC C2-E65-TV 15 페이지. Interface compatible with bmw e65 professional navigation systems with old idrive (e65) and menu button, without factory rear-seat entertainment
페이지 인쇄
1.4.1. Automatic switching to rear-view camera
dip switches
If an after-market rear-view camera shall be connected or a factory
of MOST®-box
rear-view camera is connected, in order for the c.LOGiC to
automatically switch to its camera input, when reverse is engaged
set dip2 = ON (up).
Note: Automatic switching works only from c.LOGiC mode.
1.4.2. Deactivating c.LOGiC AV2-input
If omly one AV-source shall be connected to the c.LOGiC, we
recommend to disable the AV2-input, to avoid customers switching by
mistake to black/no picture of the AV2-input. In order to disable the
AV2-input of the c.LOGiC,
set dip1 = OFF (down).
2. Installation
Switch off ignition and disconnect the vehicle's battery! If according to factory rules
disconnecting the battery has to be avoided, it is usually sufficient to put the vehicle in
sleep-mode. In case the sleep-mode does not show success, disconnect the battery with a
resistor lead.
Complete and correct function of the c.LOGiC is possible only when CAN and MOST® (tuner)
connections are made properly. On vehicles without TV-icon, it will be coded automatically
after installation.
Place of installation is at the rear of the navigation screen and at the rear of the navigation
computer.
Note: The loose white and green cable of harness TV-BM65 are not required and must be
isolated.
Version 20.09.2017
C2-E65-TV