Caraudio-Systems c.LOGiC C4-LR12-NC 매뉴얼 - 페이지 17

{카테고리_이름} Caraudio-Systems c.LOGiC C4-LR12-NC에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Caraudio-Systems c.LOGiC C4-LR12-NC 19 페이지. Interface compatible with landrover touch-screen infotainment systems from model year 2012

페이지 인쇄

4.4.

Assigning device controls for connected AV-sources (AV2/3)

After selecting the c.LOGiC as current AV-source (see chapter "Selecting the c.LOGiC as

current AV-source") choose the relevant AV-source (AV2 or AV3) by short pressing the

AUDIO/VIDEO button. After it:

• Press AUDIO/VIDEO button for 3 sec.(back into the factory mode)

• Press AUDIO/VIDEO button for 10 sec. (interface switches to the last AV-source and

starts the programming mode), the blue LED is blinking fast

• within 40 seconds, enter the device-related IR-code for AV2 (AV3) as described in

device control table (appendix A) by touch-screen, see picture of apportionment of

the numbers below

• the blue LED is blinking as often as the corresponding number of the RC-code

(e.g. the blue LED is blinking 10 times for RC-code "10").

Do not press any button or the touch-screen while the blue LED is blinking because the

programming will not be stored and must be restarted!!!

Note: The IR-control channels for AV2 and AV3 are preset to RC-Code 41 compatible

DVB-T tuners.

Version 11.02.2015

C4-LR12-NC