Caraudio-Systems r.LiNK RL-FD79-TF 매뉴얼 - 페이지 8

{카테고리_이름} Caraudio-Systems r.LiNK RL-FD79-TF에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Caraudio-Systems r.LiNK RL-FD79-TF 9 페이지. Interface, rear view camera input compatible with ford and sony 8” myford touch radios

Caraudio-Systems r.LiNK RL-FD79-TF 매뉴얼

4. Activation of the video-in-motion function

The video-in-motion can be activated and deactivated by Dip 1 on both RLC-FO01-A modules
or alternatively by steering wheel buttons or over the loose green cables in connection with
a switch (not included in delivery).
Option 1: Video-in-motion permanent
With dip1 to ON on both RLC-FO01-A modules the video-in-motion function is activated
permanently. The navigation cannot be used.
Option 2: Video-in-motion selective (recommended for the use of navigation)
There are some vehicles that will allow you to activate the Video In-Motion through the
steering wheel controls (set on both RLC-FO01-A modules dip1 to OFF):
TYPE 1 - Seen on Ford Edge and C-Max.
Hold the BACK button (Left Arrow) for 3
seconds to activate the Video In-Motion.
To deactivate - Repeat the step above.
Option 3: Video-in-motion selective (recommended for the use of navigation)
With dip1 to OFF on both RLC-FO01-A modules the included green cables are used to
activate the video-in-motion function.
Connect a switch to the green cables and connect the green cables to +12V ACC.
+12V
= TV-Free is activated
0V
= TV-Free is not activated
Version 01.03.2019
TYPE 2 - Seen on Ford F-Series vehicles.
Hold the PHONE button (OK) for 4
seconds to activate the Video In-Motion.
To deactivate - Repeat the step above.
RL-FD79-TF