Caraudio-Systems RL-LR12-TF 매뉴얼 - 페이지 4
{카테고리_이름} Caraudio-Systems RL-LR12-TF에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Caraudio-Systems RL-LR12-TF 9 페이지. R.link-interface rear-view camera-input and video-in-motion for landrover touch-screen navigation systems from model 2012
페이지 인쇄1.3.
Setting the dip switches of the CAN-box TV-400/500
TV-400
Alle vehicles
Note: Setting dip 1 to ON codes the factory rear-view camera input which is located on the
6pin male connector of the factory monitor. When reverse gear is engaged, the navigation
will automatically switch to this input.
TV-500
Vehicle/ navigation
Video-in-motion permanent
Video-in-motion selective*
* With dip1 to OFF the included green cable is used to activate the video-in-motion function
Note: Dip switch functions of the TV-500
Dip 1 – activation TV-free
Dip 2 – rear-view camera existing
Dip 3 – TV icon simulation
Dip 4 – no function
Dip 5 – CAN-bus termination resistor on the vehicle side
Dip 6 – CAN-bus termination resistor on the head-unit side
Setting dip 2 to ON codes the factory rear-view camera input which is located on the brown
Fakra male connector of the factory monitor. When reverse gear is engaged, the navigation
will automatically switch to this input. On vehicles with factory rear-view camera set Dip 2 to
ON, too.
Version 28.05.2015
dip 1 ON, dip 2 ON, dip 3 ON
Dip 1 Dip 2 Dip 3 Dip 4 Dip 5 Dip 6
ON
ON
OFF
OFF
ON
OFF
OFF
ON
ON
OFF
ON
ON
RL-LR12-TF