Caraudio-Systems RL-MZ72D 매뉴얼 - 페이지 3

{카테고리_이름} Caraudio-Systems RL-MZ72D에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Caraudio-Systems RL-MZ72D 5 페이지. Rear-view camera input compatible with 7” touchscreen mazda connect infotainment system

페이지 인쇄
Caraudio-Systems RL-MZ72D 매뉴얼
3. Unplug the hazard light connector from behind
the AC vent.
5. Once the 10mm bolt is removed, the radio
screen assembly is secured with clips. Gently
pull the assembly until it pops out.
7. Release the terminal lock by pulling it up with a
pry tool or any pointed tool. The terminal lock
does not fully remove!
Version 24.11.2017
4. With the AC vent removed, unscrew the
10mm bolt holding the radio screen.
6. Unplug the 28 pin connector from behind the
radio screen.
8. Connect the video ouput wires by inserting
the BLUE wire (Video signal +) into PIN 1 and
the GREEN wire (Video signal ground) into
PIN 15. Make sure that the pins are inserted
far enough into the connector to lock in
place. Press down the terminal lock to lock
pins in place.
RL-MZ72D