Follett Horizon Elite HCD1010RHT 매뉴얼 - 페이지 6

{카테고리_이름} Follett Horizon Elite HCD1010RHT에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Follett Horizon Elite HCD1010RHT 8 페이지. Top-mount applications
Follett Horizon Elite HCD1010RHT에 대해서도 마찬가지입니다: 설치 지침 매뉴얼 (17 페이지), 설치 지침 매뉴얼 (17 페이지), 매뉴얼 (8 페이지)

페이지 인쇄

3 – Horizon Elite ice machine mounting accessories

Optional wall mount bracket

23.00"

(58.4 cm)

4 – Horizon Elite drain - specifier guidelines

Drain details

Form# 7035

Optional machine stand

22.00"

(55.9 cm)

25.50"

(64.8 cm)

A - 15.875" (40.3 cm)

B - 19.375" (49.2 cm)

➊

2 ft x 1" OD

silicone tubing

3/4" barb x 3/4" FPT

➋

3/4" MPT x 1" slip

➌

1" Stand pipe/drain

6.88"

(17.5 cm)

C - 13.00" (33.0 cm)

D - 21.00" (53.3 cm)

Minimum 8"

radius

Remote 1010, 1410 series ice machine

Important specifier notes

1. For secure wall mounting, specify

optional wall mount bracket.

2. Wall and fasteners must support the

weight of the ice machine, bracket,

supply water and ice. Use of a backing

board may be required with hollow wall

construction.

3. Machine stand mounting adds 6.88"

(17.5 cm) to height of ice machine.

4. No dips in tube routing allowed.

5. Ice transport tube needs minimum 1/4"

per foot (2 cm per meter) pitch toward

ice machine and should be secured to

prevent dips and traps from forming.

Important specifier notes: Where

code allows, follow recommendation

below.

1. Connect the silicone tubing to the ice

machine 3/4" drain barb

➊

2. Assemble the 3/4" barb x 3/4" FPT to the

3/4" MPT x 1" slip. Connect the other end

of the silicone tubing to the 3/4" barb

3. Connect the 1" slip fitting to the 1" stand

➌

pipe/drain

Note: Minimum 8" radius on silicone

drain line. Drain line from the ice machine

must have at least 1/4" per foot pitch

(6.4 mm/0.3 m).

Note: Stand pipe/drain provided by

others. All other components provided

with ice machine.

➋