Caraudio-Systems DT1 매뉴얼 - 페이지 4

{카테고리_이름} Caraudio-Systems DT1에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Caraudio-Systems DT1 16 페이지. For bmw professional navigation systems ccc and cic with idrive

페이지 인쇄

1.1.

Check compatibility of vehicle and accessories

Requirements

Vehicle

Navigation

Limitations

Factory-TV-tuner

Teletext

After-market rear-view cam

Factory PDC

1.2.

Setting the dip switches of the CAN-box TV-436

Vehicles with CIC

Vehicles with CCC

1.3.

Setting the dip switches of the tuner-box DT1C-M736

The default dip switch settings of the tuner-box

need to be changed ONLY if a rear-view camera is

or shall be connected or if the AV-input of the

dvbLOGiC shall be deactivated. The dip switches are located

inside the tuner-box. For changes it is necessary

to open the box. Default settings are:

Dip1 = ON, Dip2 = OFF, Dip3 = OFF

Version 22.07.2014

1series (E87) only CCC, 3series (E90/91/92), 5series (E60/61),

6series (E63/64), 7series (E65/66), X5 (E70), X6 (E71), Z4 (89)

Navigation system Professional CCC (older 1/2-button iDrive

or CIC (newer 8-button iDrive)

Vehicles with TV-tuner port

Must NOT be installed. If uninstalled, optical ring must be closed.

Teletext of the dvbLOGiC can only be used with the optionally

available C3-IRSET remote control set.

Automatic switching to camera only from dvbLOGiC mode.

If an after-market rear-view camera should be connected by the

dvbLOGiC the visual PDC display must be deactivated occasionally

or permanently for camera picture.

dip 1 ON, dip 2 OFF, dip 3 OFF

dip 1 OFF, dip 2 OFF, dip 3 OFF

DT1-CXC-TV1