Caraudio-Systems dvbLOGi 매뉴얼 - 페이지 12

{카테고리_이름} Caraudio-Systems dvbLOGi에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Caraudio-Systems dvbLOGi 16 페이지. For bmw professional navigation systems ccc and cic with idrive

페이지 인쇄

2.6.3. After-market rear-view camera

Connect the video RCA of the after-market rear-view camera to the the female RCA

connector RVC of tuner-box DT1C-M736.

Connect the green wire of C2C-BMW01 to the camera power supply (+12V max. 1A).

The green wire is high (+12V) when reverse gear is engaged.

On some vehicles the reverse light signal doesn't exist on the CAN-bus. Connect the

white wire of harness C2C-BMW01 to reverse light signal (+12V of reverse light) if the

dvbLOGiC doesn't switch to the rear-view camera automatically.

Note: Automatic switching to after-market rear-view camera works only from

dvbLOGiC mode.

With an existing factory PDC the visual PDC display must be deactivated occasionally or

permanently by iDrive while operating in the vehicle settings for camera picture. If needed

the PDC display can be switched on by PDC button.

Version 22.07.2014

DT1-CXC-TV1