Caraudio-Systems v.LOGiC Intelligent Solution V5-NTG45 매뉴얼 - 페이지 11
{카테고리_이름} Caraudio-Systems v.LOGiC Intelligent Solution V5-NTG45에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Caraudio-Systems v.LOGiC Intelligent Solution V5-NTG45 17 페이지. Compatible with mercedes benz vehicles with comand online ntg4.5 navigation and audio20 ntg45 system with 4pin hsd lvds connector
페이지 인쇄
3.2.1.2.
Settings for connecting an after-market front camera
You have to configure some settings in the OSD-menus INPUTS and MISC if you want to
connect an after-market front camera (Operation of the OSD: see chapter "OSD-Operation").
OSD-menu
Menu item
REAR CAM
INPUTS
FRONT CAM
MISC
REVERSE LOGIC
Note: RGEAR+SPEED / RGEAR+TIME setting: After deactivation you can't enable the parking
process again until the vehicle is driving faster than 20km/h / less than 20 seconds has
passed or the ignition is switched off and on.
Version 03.06.2015
Setting
Explication
OFF
No rear view-camera
ON
Rear view-camera connected
OEM
Factory rear view-camera connected
Switches to front camera if parking
ON
process is enabled and reverse gear is
released
C:RGEAR
Enabled while parking process
Enabled with +12V on white wire and up
C:RGEAR+TIME
to 20 second
Enabled while parking process and up to
C:RGEAR+SPEED
20 km/h
A:RGEAR
Enabled with +12V on white wire
Enabled with +12V on white wire and up
A:RGEAR+TIME
to 20 second
Enabled with +12V on white wire and up
A:RGEAR+SPEED
to 20 km/h
V5-NTG45-PNP