Dahua D-PFS4226-24ET-240 빠른 시작 매뉴얼 - 페이지 12

{카테고리_이름} Dahua D-PFS4226-24ET-240에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dahua D-PFS4226-24ET-240 16 페이지. Poe switch 16/24-port managed desktop switch

페이지 인쇄

4.4 Connecting SFP Ethernet Port

● When installing the SFP optical module, do not touch the gold finger of the SFP optical module.

● Do not remove the dust plug of the SFP optical module before connecting the optical fiber.

● Do not directly insert the SFP optical module into the slot while the optical fiber is inserted in it.

Unplug the optical fiber before installing it.

Step 1

Wear the antistatic wrist band, and confirm that the antistatic wrist band is in good contact

with your skin and the Device is reliably grounded.

Step 2

Turn up the handle of the SFP optical module vertically and hold the optical module on

both sides with your hands.

Step 3

Push the optical module gently into the slot in the horizontal direction until the SFP optical

module is firmly connected to the slot.

Step 4

Remove the dust cap of the LC connector of the optical fiber and the dust plug of the SFP

optical module.

Step 5

Connect the LC connector of the optical fiber to the SFP optical module.

Figure 4-3 Connect cable

Figure 4-4 Install SFP module