CombiSteel 7071 Series 사용자 설명서 - 페이지 5

{카테고리_이름} CombiSteel 7071 Series에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. CombiSteel 7071 Series 18 페이지.

The Minibar must be level on both directions.

There should be 20mm.dearance to the wall.

Ventilation must be provided as shown in alternatives A, B, C or D.

The ventilation duct must be at least measure 105mmx the width of

Minibar.

Only the entire cooling unit must project into the duct as shown.

Air passing through the duct must not be preheated by any source of

heat.

Ventilation grills, if used, must have openings of at least 200cm2.

4. Operation

Initial Operation:

Be sure that the device must be plugged into a properly earthed socket. The Minibar achieves it operating

temperature after several hours. The operation is silent.

Temperature Control:

The Minibar is fitted with temperature control. The control button is situated inside the appliance

Do not fill the appliances inside too much so that it can operate efficiently. This appliance can cool products to a

maximum of 25°C under the ambient temperature.

Always pull out the mains plug before cleaning and maintenance. Do not use abrasive cleaning material and hard

object. If power supply cord is damaged, please inform your dealer.