Dahua DH-PFS3010-8ET-96 빠른 시작 매뉴얼 - 페이지 15

{카테고리_이름} Dahua DH-PFS3010-8ET-96에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dahua DH-PFS3010-8ET-96 17 페이지. 4&8-port unmanaged desktop switch
Dahua DH-PFS3010-8ET-96에 대해서도 마찬가지입니다: 사용자 설명서 (10 페이지), 빠른 시작 매뉴얼 (13 페이지)

페이지 인쇄
Dahua DH-PFS3010-8ET-96 빠른 시작 매뉴얼

4.4 Connecting Ethernet Port

The Ethernet port is a standard RJ-45 port. With its self-adaptation function, it can be automatically
configured to full duplex/half-duplex operation mode. It supports MDI/MDI-X self-recognition of the
cable, allowing you to use a cross-over cable or straight-through cable to connect the terminal
device to the network device.
The cable connection of RJ-45 connector conforms to the 568B standard (1-orange white, 2-orange,
3-green white, 4-blue, 5-blue white, 6-green, 7-brown white, 8-brown).

4.5 Connecting PoE Port

You can directly connect the Switch PoE Ethernet port to the device PoE Ethernet port through
network cable to achieve synchronized network connection and power supply. With Extend Mode
disabled, the maximum distance between the switch and the device is about 100 m.
When connecting to a non-PoE device, the device needs to be used with an isolated power supply.
Figure 4-4 Ethernet port pin number
Figure 4-5 Pin description
9