Dahua DH-PFS4218-16GT-240 빠른 시작 매뉴얼 - 페이지 12

{카테고리_이름} Dahua DH-PFS4218-16GT-240에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dahua DH-PFS4218-16GT-240 19 페이지. 16/24-port poe gigabit managed switch

The cable connection of RJ-45 connector conforms to the standard 568B (1-orange white,

2-orange, 3-green white, 4-blue, 5-blue white, 6-green, 7-brown white, 8-brown).

3.2.2 Console Port

See Figure 3-4 for console port. The switch console port and computer controlling 9-pin serial

port are connected with RJ-45-DB9 cable. You can call the console software of the device by

operating the superterminal software of the Windows system for device configuration,

maintenance, and management.

See Figure 3-5 for cable sequence of RJ-45-DB9.

One end of RJ-45-DB9 cable is RJ-45 connector, which needs to be inserted into the console

port of the device. And the other end is DB9 plug, which needs to be inserted into the computer

controlling 9-pin serial port.

See Table 3-1 for pin description.

DB9 pin

The signal is transmitted through laser by optical fiber cable. The laser conforms to the

requirement of level 1 laser products. To avoid injury upon eyes, do not look at the 1000 Base-X

optical port directly when the device is powered on.

Figure 3-4

Console port

Figure 3-5

Cable sequence of RJ-45-DB9

Table 3-1 Pin description

RJ-45 pin

Signal

RXD

TXD

GND

Description

Receiving data.

Sending data.

GND

Installation 6