Dahua PFS3005-5ET-V2 빠른 시작 매뉴얼 - 페이지 14

{카테고리_이름} Dahua PFS3005-5ET-V2에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dahua PFS3005-5ET-V2 17 페이지. Hardened managed switch

4.4 Connecting Ethernet Port

Ethernet port is a standard RJ-45 port. With self-adaptation function, it can be automatically

configured to full duplex/half-duplex operation mode. It supports MDI/MDI-X self-recognition of the

cable, therefore, you can use cross-over cable or straight-through cable to connect terminal device

to network device.

The cable connection of RJ-45 connector conforms to the standard 568B (1-orange white, 2-orange,

3-green white, 4-blue, 5-blue white, 6-green, 7-brown white, 8-brown).

If the terminal device has a PoE port, you can directly connect the terminal device PoE port to the

switch PoE port through network cable to achieve synchronized network connection and power

supply. The maximum distance between the switch and the terminal device is about 100 m.

When connecting to a non-PoE device, the Device needs to be used with an isolated power supply.

Figure 4-5 Ethernet port pin number

Figure 4-6 Cable connection