Caravaggi TPF 15 사용 및 유지 관리 핸드북 - 페이지 8

{카테고리_이름} Caravaggi TPF 15에 대한 사용 및 유지 관리 핸드북을 온라인으로 검색하거나 PDF를 다운로드하세요. Caravaggi TPF 15 15 페이지.

Electrical version

1. Check that the electric system is grounded to earth and comes with

suitable fuses.

2. Check the mains supply has the same intensity as the motor rated

power (see the rating plate).

3. Check that there are no foreign bodies inside the machine.

4. Power on the control panel, by rotating the O/I selector switch to I.

5. Switch selector 0// to .

6. When the desired rate has been achieved, switch the selector to .

I/O

selector

Petrol version

1. Check that the oil and petrol level in the engine.

2. Start the engine keeping to the instructions provided in the attached

handbook.

3. Run the engine at the minimum speed for a couple of minutes to warm

it up.

4. Operate the controls provided to bring the engine at a steady rate

condition.

Tractor version

1. Check that the drive shaft is equipped with protection covers.

2. Make sure the speed rate of the tractor power takeoff coincides with

that of the machine gearmotor.

3. Check that there are no foreign bodies inside the machine.

4. Start the tractor and operate the power takeoff.

5. STARTING UP

/ selector