AMPLIFIED ENGINEERING fatbox G3 매뉴얼 - 페이지 18
{카테고리_이름} AMPLIFIED ENGINEERING fatbox G3에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. AMPLIFIED ENGINEERING fatbox G3 20 페이지.
페이지 인쇄
WEB
fatbox G3
MANAGEMENT
MENU OPTIONS
3.8
MANAGEMENT
Quick Start
LAN Ethernet
WAN Cellular
Port Forwarding
Dynamic DNS
IPSEC VPN
Serial Port
Management
System Status
Logout
INTEGRATION
FATBOX G3 has a powerful
feature to allow end-users
to write their own custom
application program right on-
board the router. This is cost,
space and time efficient.
For example, a custom
program can be written to
check serial data read from a
PLC and trigger an SMS to a
technician for support or the
program can check for I/O
trigger from a relay to reboot
the router.
System Management
Username
fatbox
Password
********
Enable Secure Shell (SSH)
1 = enable 0 = disable
1
Enable Log
1 = enable 0 = disable
1
UPDATE
Configuration Parameters Management
Please insert usb drive labelled 'FATBOX' .
Configuration files will be in folder \config.
UPLOAD FROM FATBOX
DOWNLOAD TO FATBOX
User Application Program Management
Please insert usb drive labelled 'FATBOX' .
File user.lua must be in \user folder.
DOWNLOAD TO FATBOX
EXECUTE PROGRAM
System Recovery Management
FACTORY SETTINGS
REBOOT SYSTEM
fatbox G3
To input your own LUA program:
1. Write your LUA program and name it as
'user.lua'
2. Save the program in \user folder in
your thumb-drive (drive labelled
'FATBOX')
3. Insert the thumb-drive into FATBOX (in
stable operating condition)
4. Click 'Download to FATBOX', wait 5 sec,
remove thumb-drive
5. You can click 'Execute Program' to test
you program
Your user.lua program will automatically
be executed after complete boot-up of the
FATBOX.
Click 'Reboot' to soft reset the FATBOX
device.
Cick 'Factory Settings' to revert all
parameters to factory default.