Dahua 42212TNI 빠른 시작 매뉴얼 - 페이지 17

{카테고리_이름} Dahua 42212TNI에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dahua 42212TNI 20 페이지. Network mini ptz camera

5.5 Configuring Alarms

The device's Web Interface offers a Relay Activation page to configure alarms and to set alarm

responses.

1. Access the Web Interface for the device and click the Setup tab. Expand the Event menu,

then choose the Alarm page. Set the alarm input and output parameters in the Relay

Activation page.

2. Set the parameters for the alarm inputs. Check the Enable box to activate the chosen alarm

input (Alarm 1 or Alarm 2). Set the sensor type for the alarm, either Normally Open (NO) or

Normally Closed (NC).

3. Check the Relay Out box to enable the alarm activation function.

4. Select an alarm output port to activate a corresponding alarm device when an alarm occurs.

Check Send Email to have the device send an email to alert when alarm occurs and ends.

Check Snapshot to have the device automatically take a snapshot of the scene if alarm

occurs.

The devices Web interface contains settings to control the recording medium and to configure an

alarm that triggers once the Micro SD card passes a pre-determined storage.

1. Access the Web Interface for the device and click the Setup tab. Expand the Storage menu,

then choose the Destination page.

Figure 5-4

Figure 5-5