Doyon Artisan 사용 설명서 - 페이지 17

{카테고리_이름} Doyon Artisan에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Doyon Artisan 18 페이지.

6.1 PrOgraMMIng tHe COntrOL PaneL Of tHe PrOver

With the control panel ON, select the desired temperature

and humidity levels. The control panel will maintain these pa-

rameters until they have been changed by the user.

· ON: If the control panel is turned off (OFF), press the

button for 2 seconds or more to turn it on. It will

assume the previously programmed temperature and

humidity levels.

· INCREASE OR DECREASE value: To modify the param-

eters for humidity or temperature, briefly press the

corresponding button and the value will appear on

the display. In order to alter this value use the buttons

to increase or decrease the respective val-

ue. To validate the selected value, briefly press the but-

ton corresponding to the value that was altered once

again.

· REGULATING THE PROVER TEMPERATURE: To turn

the temperature regulator ON or OFF, press the but-

ton

for 2 seconds. If the led light is on, the tempera-

ture regulator is turned on.

· REGULATING THE HUMIDITY: The humidity can only be

regulated when the led light of the button

on. To turn the humidity control panel ON or OFF, press

this button for 2 seconds.

· OFF: When the button

more, the control panel goes from ON to OFF. When OFF,

the led light of the button remains on. In this situation,

the displays, outputs and buttons are turned off with the

exception of the light that can be turned on to allow for

its cleaning.

is turned

is pressed for 2 seconds or

CLeanIng tHe SePtIC BOX

Remove the water from the container on a monthly basis.

MODULRAM DIGITAL | Edition A - Revision 0

Instruction Manual | 17