CombiSteel 7455.1410 사용자 설명서 - 페이지 4
{카테고리_이름} CombiSteel 7455.1410에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. CombiSteel 7455.1410 10 페이지. Planetary mixer
페이지 인쇄Troubleshooting
Problem
The mixing shaft doesn't rotate
after switching on
Oil leakage
The raising handle is too tight
Temperature rise of motor is too
high, below speed
The noise of the gearbox is loud,
its temperature is too high
The agitator knocks against the
bowl
Probable cause
Electric connectors are loose
Oil seals are worn out
Guideways are corroded
The lead screw, bevel gear and
hand wheel shaft etc. are dry
Lack of voltage
Overload
The working speed selected is too
high or agitator is not suitable
Lubrication is insufficient
The agitator or the bowl is
deformed
www.combisteel.com
Remedy
Check the electric circuit, tighten
those loose connectors
Replace those oil seals
Clean and oil the guideways
Oil them
Check the supply voltage
Load less
Select a suitable speed and
agitator
Add or replace the oil
Repair or replace deformed part
4