Boots CR 255 사용 설명서 - 페이지 5
{카테고리_이름} Boots CR 255에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Boots CR 255 8 페이지.
페이지 인쇄PLAYBACK .
Cassettes
may
be played back through the internal
speaker, through
an earphone or
small
extension
speaker
(8 ohms
impedance)
using
the earphone
socket.
The same
socket
may
also
be used
to connect
the recorder to other audio equipment
for the
playback of cassettes.
RECORDING
USING
THE
BUILT-IN
MICROPHONE.
Insert a cassette and depress the Record
Key and the Play Key simultaneously.
The
Recording indicator
LED
will show
that the machine
is in the record mode.
This
indicator will glow brightly when the machine is operated from the mains, or when the
batteries are in a good condition.
When batteries are weak, this indicator will glow
dimly indicating that the batteries need replacement.
Position
the
microphone
about
12ins/30cm
from
the sound
source.
The
recorder
features an Automatic
Level Control
(ALC) to maintain all recordings at an optimum
level.
The volume control operates only during replay and therefore does not need
adjustment.
Because
the microphone
built into your machine
is in close proximity to mechanical
moving
parts, it may
pick up noise from these if the recorder
is operated
at greater
distances than 12ins/30cm from the sound source.
RECORDING
USING
AN EXTERNAL
MICROPHONE.
Connect
a tow-impedance microphone
to the Microphone
Socket
(3.5mm jack).
For
microphones featuring a remote stop-start switch, connect this facility to the Remote
Socket (2.5mm jack). Operate the recorder as above.
For optimum signal to noise performance, position the external microphone as close to
the sound source as possible.
insertion of a jack plug into the microphone socket
automatically disconnects the built-in microphone.
RECORDING
USING
THE
AUXILIARY
SOCKET.
The Auxiliary Socket enables your recorder to be directly connected
to other equip-
ment
for
making
recordings.
Insertion
of a plug
into this socket
automatically
disconnects the built-in microphone.
The ALC
operates
also when
recording directly
using the Auxiliary
Socket and no
volume
adjustment
is necessary.
The nominal sensitivity of the Auxiliary Socket
is
80mvV.
After connecting your machine to the other equipment, recordings are made by inserting
a cassette and depressing the Record Key and Play Key simultaneously.
The Recording
Indicator LED will show that the machine is in the record mode.
AUTO STOP.
The CR255
incorporates a mechanical auto stop which automatically disengages the
playback or record functions at the end of a cassette.
This does not operate in either the fast-forward or rewind modes.
—
4q—