Dahua Technology D-IPC-HDBW3841EP-S-0280-S2 빠른 시작 매뉴얼 - 페이지 12
{카테고리_이름} Dahua Technology D-IPC-HDBW3841EP-S-0280-S2에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dahua Technology D-IPC-HDBW3841EP-S-0280-S2 19 페이지. Dome network camera
페이지 인쇄
Step 9
Select Easy4ip or select Auto-check for updates according to the actual needs. If neither,
leave them unselected.
Step 10 Click OK to initialize the device.
Click the success icon ( ) or the failure icon ( ) for the details.
Step 11 Click Finish.
2.2 Changing Device IP Address
● You can change IP address of one or multiple devices at one time. This section is based on
changing IP addresses in batches.
● Changing IP addresses in batches is available only when the corresponding devices have the
same login password.
Step 1
Do Step1 to Step5 in "2.1 Initializing Device" to search for devices in your network
segment.
After clicking Search Setting, enter the username and password, and make sure that they
are the same as what you set during initialization; otherwise there will be wrong password
notice.
Step 2
Select the devices whose IP addresses need to be modified, and then click Batch Modify
IP.
Figure 2-3 Device initialization
6
Quick Start Guide