Follett Maestro Chewblet 400 Series 설치 및 서비스 매뉴얼 - 페이지 4
{카테고리_이름} Follett Maestro Chewblet 400 Series에 대한 설치 및 서비스 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Follett Maestro Chewblet 400 Series 20 페이지. Ice machine and top kit
Follett Maestro Chewblet 400 Series에 대해서도 마찬가지입니다: 설치 및 서비스 매뉴얼 (20 페이지), 설치, 운영 및 서비스 매뉴얼 (20 페이지)
페이지 인쇄
Specifi cations
Electrical
Model number
MC400 series ice machine
Ambient specifi cations
Air temperature
Water temperature
Water pressure
Plumbing
Your new ice machine is equipped with a drain line to simplify draining the evaporator and fl oat reservoir. The
tube labeled "fl oat/evap drain" is for SERVICE USE ONLY and must NOT be connected to the ice machine drain.
Water line sizes
Drain line sizes
Slope to drain
•
Water shut-off recommended within 10 feet (3m), drain to be hard-piped and insulated
•
Separate drains for ice machine and condenser. To prevent back fl ow, do NOT connect drains.
•
Follett recommends installation of a Follett water fi lter system (part# 00130229) in ice machine inlet water line
Field Wiring: countertop and wall mount dispensers with RIDE™ remote
ice delivery model ice machines
Consult enclosed D400A/W, R400A/W, MCD400A/W manual.
115/60/1
100 F/38 C max.
90 F/32 C max.
70 P.S.I. max. (482kPA) 10 P.S.I min. (89kPA)
Make up water (inlet to fl oat)
Condenser (water-cooled only)
Ice machine drain
Condenser (water-cooled only)
1/4" per foot (6mm per 30.4cm run)
4
Full load amps
11.0 amps
50 F/10 C min. (best performance below 80 F/27 C)
40 F/4 C min. (best performance below 70 F/21 C)
1/4" min.
3/8" min.
3/4" min.
1/2" min.
1/2" min.
Max. fuse size
20 amps