Amplitec C23S-EGSM 사용자 설명서 - 페이지 4

{카테고리_이름} Amplitec C23S-EGSM에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Amplitec C23S-EGSM 19 페이지. 23dbm single wide band repeater

Chapter 3 - Standard and Specification

Repeater is essentially a same frequency, transparent and amplify equipment.

Inside the single system repeater there are two independent amplify link

roads---Up Link and Down Link. DL gets the RF signal by donor antenna from

the BTS, amplifies the signal and then transmits to the area to be covered

through the coverage antenna. At the same time, the UL receives the RF

signal from the mobile station by coverage antenna, amplifies the signal and

then transmits back to the BTS by donor antenna.

 The display shows very clearly of all display devices and the button function

are more intuitively and faster

 Could support dual mobile communication network

 Low power consumption, low interference

 ALC could limit the output power to ensure stable coverage

 Frequency power display function can keep abreast of real-time signal

strength

 Manual gain attenuation, with 1dB steep to attenuate the gain among 1-31dB

range

 Isolation auto detection and adjustment, AGC auto control, install with one

button which is much more easier for project setting, could install and debug

quickly；

 Apply for medium and small areas coverage, such as VIP room, meeting

room, office, bedroom, apartment, hotel, parking lot and so on.