Follett Maestro Plus MCD425WVS 설치 지침 매뉴얼 - 페이지 13

{카테고리_이름} Follett Maestro Plus MCD425WVS에 대한 설치 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Follett Maestro Plus MCD425WVS 16 페이지. With ride technology

RIDE model ice machine start up procedure

The start-up procedure below is intended to ensure that ice machine is operating properly after installation has

been made. Check each item listed and call factory immediately for assistance if you experience problems with

unit.

§ Ice machine MUST be sanitized prior to operation!

§ Consult Operation and Service Manual provided with ice machine for sanitizing instructions.

7.1

1. Turn on water to ice machine.

2. Check that hose clamp securely holds ice transport tube on evaporator port.

7.2

1. Turn on power to ice machine and confirm that gearmotor, fan motor and compressor start immediately.

2. Check that ice begins to enter dispenser bin area within approximately 10 minutes.

3. Put ice against bin level thermostat in dispenser bin and check that compressor and gear motor shut

down immediately after thermostat opens. Fan will continue to run for an additional 10 minutes.

4. Check that ice machine comes back on in approximately 20 minutes (bin signal must be present).

Vision • RIDE Technology

NOTICE!

Maestro Plus