Amplitec C10G-CP 사용자 설명서 - 페이지 3

{카테고리_이름} Amplitec C10G-CP에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Amplitec C10G-CP 13 페이지. Wide band mini booster

Overview

C10G-CP wide band mini Booster is designed with harmonious humanity conception, as a

perfect combination of environmental protection and signal coverage. The C10G-CP

products carried with many features like, low consumption, light weight, high gain, low

output power and easy installation, etc, It provides a rapid and perfect solution to solve

and optimize the weak signal of houses, offices, hotels, elevators, underground parking

lots and other small weak signal area.

On the condition that to assure the normal communication, C10G-CP products using the

smallest Rx and Tx power to achieve the link balance among BTS and mobile phone and

Boosters, guaranteed that the least Rx and Tx power from the products, the least harm to

environmental pollution and human body's radiation.

C10G series products has ALC and ATT function, which offer the product reliability and the

coverage stable signal technically. In addition, the C10G series products add ALC warning

directive function to let users knowing signal quality by the indicator's colour.

The system has the automatic gain control function. By comparing the voltage value

of the UL detection tube and the line detection tube with the set value, if the sampling

value is larger than the set value, then increase the attenuation value of the

corresponding channel attenuator until the corresponding detection tube voltage is

less than the set value. If the sampling value is less than the set value, then decrease

the attenuation value of the corresponding channel attenuator until the corresponding

detection tube voltage is larger than the set value or the attenuation value is 0.

The system has the output over power cut off function. When the attenuation value of

the UL or DL attenuator caused by the AGC control is more than or equal to 31dB, the

system will switch off the corresponding channel. Otherwise, when the attenuation

value is less than 31dB, turn on the corresponding channel switch.

The system has self-excited detection function. When its UL or DL occurs

self-excitation, the system shuts down the switch and keep 400 seconds, the number

of self-excited statistics plus 1. After 400 seconds, turn on the switch of UL and DL, if

continue to detect the self-excited then turn off the switch and keep 400s, the number

of self-excited statistics plus 1. If there is no self-excited, the self-excited statistics are

cleared and the system return to normal. If the self-excited is detected up to 3 times is

succession, the switch will be permanently turned off until the power off and restarted.

Any detection results in no self-excited before the permanent shut-off, the number of

self - excitation statistics will be cleared, and the system will return to normal.

Booster is a linear amplification of the wireless signal. When the Booster is not

installed right and lead to self-excited situation, the Booster by detecting the linear

relationship between input and output to determine self-excited, if self-excitation it will

turn off their own to prevent Network with itself until troubleshooting.

Amplify your world

3 / 13