Amplitec C20L-LTE7 사용자 설명서 - 페이지 10

{카테고리_이름} Amplitec C20L-LTE7에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Amplitec C20L-LTE7 13 페이지.

3) Put the expansion pipes(size: 8mm) into the 4 drilled holes.

4) As shown in the figure, align the fixing holes of the U-shaped back holder with corresponding holes

on the wall, and drive 4 M6*40 screws into the expand plugs with screwdriver and fasten the repeater

firmly.

Antenna Connections

Select suitable outdoor antenna and indoor antenna, according to the characteristic of the coverage

area. Installation and connection of outdoor antenna and indoor antenna should follow the requirements

as following:

1）The outdoor antenna should be installed at the place with the strongest signal and towards

BTS.

2）The length of cable, which connect the outdoor antenna and the booster, should less than be 20

meters.

3）Wrap the waterproof tape around the connection between outdoor antenna and outdoor cable.

4）The indoor antenna should be 5m away from the outdoor antenna in height, and can't towards

outdoor antenna.

5）It will be better if there can be a wall between outdoor and indoor antenna.

6）Outdoor antenna should connect to BTS port of the signal booster and indoor antenna to the

MS port