AmpliVox SW1230 사용자 설명서 - 페이지 6
{카테고리_이름} AmpliVox SW1230에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. AmpliVox SW1230 7 페이지. Mity box passive / amplified / wireless speaker
페이지 인쇄
OPTIONAL WIRELESS HANDHELD MICROPHONE—MODEL S1695
If you are using the Amplivox S1695 Wireless Handheld Microphone Transmitter, screw off the lower bottom section of microphone
and insert 2 - "AA" 1.5 Volt alkaline batteries.
BATTERIES
1. Hold the body of microphone in hand and twist off bottom section of microphone.
2. Insert two "AA" batteries.
3. Twist bottom section back on to microphone.
BATTERY STATUS
The life expectancy of the two batteries is about 10 hours. When the "BATTERY" symbol
on the display screen keeps flashing, the batteries should be replaced immediately.
FUNCTIONS
Interchangeable Microphone Head
LCD Screen
Power / Mute Control Switch
Select Button
Microphone Input Sensitivity Adjustment—is used to set the gain of microphone.
If you are a soft talking speaker you will need to turn the control counter clockwise.
Turn clockwise if you are a loud talker. Use plastic screwdriver that is supplied.
MICROPHONE OPERATION AND STATUS DISPLAY
TURN ON MICROPHONE: Push and hold the "POWER/MUTE"
TO MUTE: Press "POWER/MUTE"
button again twice to remove "MUTE".
TURN OFF MICROPHONE: Push and hold the "POWER/MUTE"
"OFF".
SELECT CHANNEL: Press and hold the "SELECT"
Channel and the channel number. To change channel, when flashing, press the "SELECT"
you reach the desired channel. Flashing will stop after 10 seconds and channel is now set.
LOCK / UNLOCK CHANNEL: Push the "POWER/MUTE"
time to lock or unlock channel. When locked, channel cannot be changed. "LOCKED" symbol appears in upper
left-hand corner.
button twice to MUTE. Channel number will flash when muted. Press
button for 2 seconds until you only see the word
button and "SELECT"
button until LCD screen lights up.
button for 2 seconds to turn microphone
button at the same
6
button until