Comcast COMCAST DIGITAL VOICE 사용자 설명서 - 페이지 7
{카테고리_이름} Comcast COMCAST DIGITAL VOICE에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Comcast COMCAST DIGITAL VOICE 11 페이지. Wireless gateway
Comcast COMCAST DIGITAL VOICE에 대해서도 마찬가지입니다: 사용자 설명서 (11 페이지), 빠른 시작 매뉴얼 (8 페이지)
페이지 인쇄
Repeat Dialing
Never waste time redialing a busy number again.
Repeat Dialing redials a busy number until the line is available. While Repeat Dialing attempts to
reach the called party, you can still use your phone to make and receive other calls.
To use Repeat Dialing:
1. Hang up the receiver after you receive a busy signal.
2. Lift the receiver and listen for the dial tone.
3. Press
, then hang up the receiver.
4. Repeat Dialing will attempt to reach the called party for 30 minutes.
5. When the called party's phone is available, your phone will ring.
6. When you pick up your phone, the called party's phone will ring and your call will
be connected.
7. If you do not wish to wait the full 30 minutes, you can cancel the feature sooner.
To cancel Repeat Dialing:
1. Lift the receiver and listen for the dial tone.
2. Press
.
Note:
Repeat Dialing will not work for long distance or international numbers.
Speed Dial 8
The convenience of speed dialing for up to 8 of your most frequently called numbers.
Speed Dial 8 allows you to call family, friends, and colleagues by pressing just one digit. You can
program both local and domestic long distance numbers.
To set up Speed Dial 8:
1. Lift the receiver and listen for the dial tone.
2. Press
.
3. Enter a speed dial digit between 2 and 9.
4. Dial the phone number you would like the digit to represent and press
dial
plus the area code before the number if it's necessary to place the call.)
5. To add the next number, repeat steps 2 through 4.
To use Speed Dial 8:
1. Lift the receiver and listen for the dial tone.
2. Dial the digit (2 through 9) that represents the number you wish
to call and then press
.
8
SAVE TIME
. (Remember to
C A L L I N G F E AT U R E S
PROTECT YOUR PRIVACY
Anonymous Call Rejection
Automatically reject calls from Caller ID blocked numbers.
Anonymous Call Rejection announces to callers who block the display of their name and number that
you are not accepting blocked calls and instructs them to unblock their information and dial you again.
To use Anonymous Call Rejection:
1. Lift the receiver and listen for the dial tone.
2. Press
and listen for a confirmation tone that the feature has been activated.
To cancel Anonymous Call Rejection:
1. Lift the receiver and listen for the dial tone.
2. Press
and listen for a confirmation tone that the feature has been canceled.
Call Screening
Decline calls from selected parties.
When you don't want to be interrupted by certain callers, Call Screening allows you to create a list of
up to 12 numbers that will receive an announcement indicating you are not presently accepting calls.
To use Call Screening:
1. Lift the receiver and listen for the dial tone.
2. Press
.
3. A menu of options will guide you in managing this feature. The prompts will enable you to
activate and deactivate the feature as well as add, delete, or review the numbers on your list.
To cancel Call Screening:
1. Lift the receiver and listen for the dial tone.
2. Press
.
3. When prompted press
, to turn the feature off.
Note:
When creating your list, enter the area code plus the 7 digit number for both local and domestic long distance numbers.
C A L L I N G F E AT U R E S
9