Comcast xFi 빠른 시작 매뉴얼 - 페이지 3
{카테고리_이름} Comcast xFi에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Comcast xFi 6 페이지. Wireless gateway
페이지 인쇄
Don't Have a Smartphone?
1.
Connect Cables and Power Up.
A
Place your xFi Wireless Gateway near
a cable wall outlet, in a central location,
away from windows and external walls.
B
Screw one end of the coax cable to the
Cable In/RF In port on your Gateway.
Screw the other end to the cable wall outlet
or one of the ports on the splitter. Make
sure these connections are finger tight.
If this device is replacing an existing
!
modem/Wireless Gateway, please
disconnect it before proceeding.
C
Plug the power cord into the back
of your Gateway and then into an
electrical outlet.
If your Gateway doesn't turn on, make sure
!
your electrical outlet works. Also, check
if your electrical outlet is controlled by a
wall switch.
D
Wait until the Power, US/DS, and Online
lights remain solid for 1 minute. The lights
may flash for up to 20 minutes, and your
Wireless Gateway may reboot. When these
lights STOP flashing, move on to Step 2.
If the lights do not stop flashing after
!
20 minutes, tighten the cables. Then
try moving your Gateway to a
different cable wall outlet.
For XFINITY Voice customers
If you have XFINITY Voice service, connect
your telephone to the Tel 1 connection on
your Gateway using a telephone cord (not
included). If you ordered a battery with
your service, please use the instructions
packaged with the battery to install it.
Start Here.
If connecting multiple devices to one cable
!
wall outlet, you will need to use a splitter.
Power
US/DS
Online
2.4 GHz
5 GHz
Flashing = Wait
Power
US/DS
Online
2.4 GHz
5 GHz
Steady = Ready