Doyson UC 400 S 사용자 설명서 - 페이지 2
{카테고리_이름} Doyson UC 400 S에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Doyson UC 400 S 2 페이지. Control module with bluetooth
Doyson UC 400 S에 대해서도 마찬가지입니다: 사용자 설명서 (2 페이지)
페이지 인쇄S 200 FM BT USER MANUAL
HOW TO SWITCH ON AND OFF THE CONTROL MODULE: Press the
control module on/off key. The display will light up and either the radio station
number or the time will be shown on it. Press again the on/off key to switch
the control module off.
SELECTION OF CHANNEL 1, FM RADIO AND AUXILIARY AUDIO INPUT:
Press repeatedly the FM/CH key to select the audio channels, the FM radio
or the auxiliary audio input. The selected audio source will shown on the
display.
GENERAL SYSTEM ON/OFF: Pressing simultaneously the on/off and > keys
all the control modules of the multiroom system will switch on while a flashing
"ON" will be shown on the display.
Pressing simultaneously the on/off and < keys all the control modules of the
multiroom system will switch off while a flashing "OFF" will be shown on the
display.
CONTROL OF BASS, TREBLE, BALANCE AND 3D-SOUND: While the
control module is on, press repeatedly the MOD key until the feature you
want to adjust is shown on the display. Then use the keys < and > to regulate
the function.
TIME SETUP: Either when the control module is on or off, press repeatedly
the MOD key until the function "SET" is shown on the display. Set the time
using the < > keys. Once the time is set in one module, the rest of control
modules will automatically be sincronized.
AUTO OFF SETUP: While the control module is on, press repeatedly the
MOD key until the "AUTO OFF" function is shown on the display. The time
countdown for automatic desconexion will set by pressing the on/off key
repeatedly (time will increase in intervals of 15 minutes) or using the < > keys
(time will increase in intervals of 1 minute).
AUTO ON SETUP: While the control module is off, keep pressed the on/off
key until the "AUTO ON" function is shown on the display. The time countdown
for automatic conexion will set by pressing the on/off key repeatedly (time will
increase in intervals of 15 minutes) or using the < > keys (time will increase
in intervals of 1 minute).
SLEEP MODE: While the control module is on, press repeatedly the MOD
key until the function "SLEEP" is shown on the display. The switch off time can
be set by pressing the on/off key repeatedly (time will increase in intervals of
15 minutes up to 90 minutes) or using the < > keys (time will increase in
intervals of 1 minute).
Another way to activate this function is by keeping pressed the on/off key
during 3 seconds while the control module is on. When the "SLEEP" mode is
shown on the display, the switch off time can be set by pressing the on/off key
repeatedly (time will increase in intervals of 15 minutes) or using the < > keys
(time will increase in intervals of 1 minute).
FM FUNCTIONS : To turn the FM tuner on firstly switch the control module
on. Press the FM/CH key. The latest selected radio station will be shown on
the display.
Automatic scan: Once the FM function is already selected, press shortly the
FM/CH key. The FM symbol on the display will start flashing. A long push to
the > key will make an automatic upward scan. A long push to the < key will
make an automatic downward scan.
Manual step by step scan: Once the FM function is already selected, press
shortly the FM/CH key. The FM symbol on the display will start flashing. A short
push to the > key will make a 0.1 MHz step by step upward scan. A long push
to the < key will make a 0.1 MHz step by step downward scan.
Radio station memories: Once you have selected the radio station you want
to memorize, press twice the MOD key. The function "FM STORE" will show
on the display. Choose the memory number where you want to memorize
the radio station by using the < > keys. Then press the MOD key to validate.
The operation can be repeated for the rest of memories.
Selection of pre-set stations: Once the radio stations are memorized as per
the paragraph above, press the MOD key. "FM SELECT" will shown on the
display. The pre-set stations can be selected by using the < > keys.
ALARM CLOCK SETUP: Either when the control module is on or off, press
repeatedly the MOD key until the "ALARM" function is shown on the display.
Using the < > keys the alarm time can be set. Immediately after the alarm
mode (FM, CH, IN or BEEP) can be chosen by pressing the lower key on the
right hand side. The alarm clock volume can be also preset using the < > keys.
A small bell symbol on the display will show the alarm clock is on.
To switch off the alarm clock when ringing just press any key.
To deactivate the alarm clock function press repeatedly the MOD key until
the "ALARM" function is shown on the display. Immediately after press repeatedly
the lower key on the right hand side until "ALARM OFF" is shown on the
display. The bell symbol will not appear on the display any more.
The control module memorizes the last alarm clock setting if no new features
are introduced.
MICROPHONE FUNCTIONS: General calls: While the control module is on,
press shortly the MIC key. Immediately after "CALL" will be shown on the
display, speak and press again the MIC key to hang up. The rest of control
modules will show on their displays the zone number that is calling during the
incoming call.
Zone calls: While the control module is on, keep pressed during 2 seconds
the MIC key. Immediately after "CALL 1, 2...'c9" will be shown on the display.
Use the < > keys to chose the zone to call. Then press the MIC key to start
talking. Press again the MIC key to hang up.
Baby-phone: While the control module is off, press the MIC key. "BABY ROOM"
will appear on the display. Activate or deactivate this function using the < >
keys. Once the first baby room is activated the control module in the listening
area must be also activated. With the listener control module off, press twice
the MIC key. "PARENT" will shown on the display. Then use the < > keys to
activate or deactivate the listening function.
Up to 5 baby rooms and 5 listening areas can be selected to be working
simultaneously.
DO NOT DISTURB MODE: Either when the control module is on or off,
press repeatedly the MOD key until " DONT DISTURB:OFF " is shown on
the display. Press the > key to activate the "do not disturb" function. " DONT
DISTURB:ON " will be shown on the display. From that moment the control
module will not receive any call.
To deactivate this function, repeat the operation and press the key <. " DONT
DISTURB:OFF " will be shown on the display and from that moment the "do
not disturb" mode will be deactivated.
AUXILIARY AUDIO INPUT (IN): Connect the audio player jack in the audio
socket. Press the FM key until "IN" is shown on the display.
BLUETOOTH CONNECTION:
With the control module turned on, press the key
with the
symbol until the BLUETOOTH function
appears moving along the screen. Then keep this key
pressed for two seconds so that the BLUETOOTH
function goes into visible mode. BTDISCOVER will
appear on the screen.
From that moment you have one minute to search
your device "DOYSON-xxxxxx", select it to pair it
and enter the code 0000. The module will show on
the screen BT: ON to indicate that it is linked. When
sending music from your device, PLAY will be displayed
on the screen.
For future occasions you only need to connect from
your mobile device with the desired area, even when
the control module is turned off.