Comcast ON DEMAND M1057 사용자 설명서

{카테고리_이름} Comcast ON DEMAND M1057에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Comcast ON DEMAND M1057 2 페이지. Comcast ondemand 3-device universal remote user guide

FEATURES AND FUNCTIONS
Use the remote control' s mode keys
(i.e., AUX, TV, or Cable) to control a spe-
cific device. When pressed, the selected
Custom 3-Device
mode key will light, confirming your
Universal Remote Control
choice. Use the other keys to perform
desired actions (see the following key
chart).
NOTE: The selected mode will remain active
until you press another mode key.
Press AUX, TV, or Cable
once to select and
control a device.
Press Power once to
turn on or off the
selected home enter-
tainment device.
Use Setup for all
programming
sequences.
Press All On once to
turn on or off all
programmed devices
in this order: Cable,
TV, and AUX. After all
devices are on, Cable
is the active mode.
Press ON DEMAND once
to access Comcast' s
ON DEMAND menu.
In the AUX or TV
USER GUIDE
mode, use the
transport keys to
control a VCR, PVR,
or DVD player. To
record a program on a
OVERVIEW
VCR, press REC twice.
The Comcast Custom 3-Device universal
In the Cable mode, use
remote will control up to three home
the keys to control ON
entertainment devices, including a Cable
DEMAND programs.
Box (used by Comcast Systems), a TV, a
Use A, B, or C to access
VCR, an Audio Amplifier or Receiver, a
interactive program
DVD player, or a PVR.
guide functions on
The remote control requires installing
your Scientific Atlanta
two (2) new AA batteries (included)
Explorer, Pioneer
and some easy programming to con-
Voyager, or Pace Cable
Box.
trol your devices. For best results,
Use Lock to restrict
please read and perform all instruc-
viewing of selected
tions listed here. Also, keep this guide
programs (Parental
for future reference.
Control) on your
Motorola (GI or
Jerrold) Cable Box.
INSTALLING BATTERIES
Use PPV to access
1.
Pull back the remote control' s
information on avail-
battery cover and remove it.
able Pay-Per-View
movies and events on
2.
Insert the two (2) supplied
your Motorola (GI or
AA batteries according to the +
Jerrold) Cable Box.
and - marks in the battery case.
Use Page+ (or Page-)
3.
Push the battery cover back
to page up (or down)
into place.
through menu screens
4.
Test the unit by pressing any
and the interactive
mode key (i.e., AUX, TV, or Cable).
program guide.
If batteries are inserted correctly,
Use Guide to display
the selected mode key will light.
the interactive
NOTE: When batteries need replacement,
program guide.
the remote control will stop operating.
Replace the old batteries and the unit will be
restored to its full functionality, complete
with your favorite settings.
PROGRAMMING
Use these keys to move
the cursor in the inter-
DEVICE CONTROL
active program guide
The Comcast Custom 3-Device univer-
and menu screens.
sal remote control is preprogrammed at
Use OK (Select)to select
the factory to operate the Cable Box
menu options, PPV
supplied by your Comcast system, an
events, and programs
RCA TV, and an RCA VCR (in the AUX
from the interactive
mode). To control devices other than
program guide.
default brands (excluding the Cable
Use Info to display
Box), perform the below steps; other-
wise skip this section:
current channel and
program information.
1.
Turn on a device (e.g., VCR or
DVD Player) and, if applicable,
Use Menu to display
insert media, (e.g., video cassette
the Quick Menu (on a
or disc).
Motorola, GI, or
Jerrold Cable Box), or
NOTE: Please read steps 2 to 6 com-
to access settings (on a
pletely before proceeding. Highlight or
Scientific Atlanta
write down the codes and device you
Explorer, Pioneer
wish to program before moving on to
Voyager, or
step 2.
Pace Cable Box).
2.
On the remote control, press a
Use Exit to exit the
device key once (i.e., AUX or TV).
menu or guide.
NOTE: Use the AUX key to program
Use Help to access
control of an Audio Amplifier or
digital cable help.
Receiver, a DVD Player, a Home-
Use Last to recall the
Theater-In-A-Box Device, a PVR (or
last channel or go back
DVR), or a VCR.
one screen in the
3.
Press and hold Setup until the
menu.
selected mode key blinks twice,
Use VOL+ (or VOL-)
then release Setup.
to raise (or lower) the
4.
Locate the code for your device in
sound volume. Also
Manufacturer' s Codes on the back
see Changing Volume
of this user guide. Brands are list-
Lock.
ed in alphabetical order with the
most popular codes listed first.
Press Mute once to
turn sound off or on.
5.
Enter the first four-digit code for
In the Cable mode,
your device. If you perform this
procedure correctly, the selected
press FAV once to
mode key will blink twice.
display programmed
favorite cable chan-
NOTE: If you enter an invalid code,
nels.
the selected mode key will display one
Use CH+ (or CH-) to
long blink and exit the programming
select the next higher
mode. Repeat steps 2 to 5 with a valid
code.
(or lower) channel.
6.
Aim the remote control at your
When controlling a
device and press Power once. The
DVD player, use CH+
device should turn off. If it does
(or CH-) to skip
not respond, repeat steps 2 to 6,
forward (or skip
trying each code listed for your
reverse) through
brand until you find one that
video.
works. If it still does not work, try
Use the keypad (0 ~ 9)
Searching For Your Code.
to directly select the
channels (e.g., 09 or
NOTE: If the device does not have a
031).
Power key, press the
(Play) key.
7.
For future reference, write your
In the TV mode, use
device code in the appropriate
boxes below:
this key to switch the
TV' s input to view TV
AUX Code:
or video programs.
In the AUX mode, use
this key to switch the
VCR, PVR (or DVR),
Device Type:______________
or DVD player to view
TV or video. For an
TV Code:
audio device, use it to
switch
to an input source.
Use Enter to enter
8.
Repeat steps 1 to 7 for another
channels on some TV
device you want to control.
models or information
on menu screens.
SEARCHING FOR YOUR CODE
6.
To check another device code,
repeat steps 1 to 5, but substitute
If your home entertainment device does
the AUX key for the auxiliary
not respond to the remote control after
device you are checking. Write
trying all of the codes listed for your
down the codes in the appropriate
brand, or if your brand is not listed at all,
boxes below:
try searching for your code.
AUX Code:
For example, after trying all of the
codes for your TV, you still cannot get
the remote control to operate your TV,
then:
Device Type:______________
1.
Turn on your TV.
TV Code:
2.
On the remote control, press TV
once. Then press and hold Setup
until the TV key blinks twice, then
release Setup.
3.
Enter 9 - 9 - 1. The TV key will
blink twice.
CHANGING VOLUME LOCK
4.
Aim the remote control at the the
The Comcast Custom 3-Device universal
TV and slowly alternate between
remote control is set at the factory to
pressing Power and TV.
control the TV volume in all modes.
Stop when the TV turns off. A
However, you may change the Volume
working code has been found.
Lock setting to Individual Volume
Unlock to unlock a specific device' s vol-
NOTE: In the search mode, the
ume controls for independent opera-
remote control will send IR codes
tion in its own mode (e.g., Audio
from its library to the selected device,
Receiver volume controls in the AUX
starting with the most popular code
mode).
first.
Or, if desired, you can perform Global
5.
Press Setup once to lock in the
Volume Unlock so that the volume
code.The TV key will blink twice.
controls of all devices can be indepen-
6.
To search for the codes of another
dently operated in their own modes.
device, repeat steps 1 to 5, but
Unlocking Volume Control For A
substitute the AUX key for the aux-
iliary device you are searching for.
Single Device (Individual Volume
Unlock):
1.
Press a desired mode key where
CHECKING THE CODES
you want volume to be unlocked
(e.g., AUX) and controlled within
If you have set up the remote control
its own mode.
using the Searching For Your Code
procedure, you may need to find out
2.
Press and hold Setup until the
which four-digit code is operating your
selected mode key blinks twice,
equipment. Perform the following steps
then release Setup.
after setting up your devices to find out
3.
Enter 9 - 9 - 3 and then press VOL-
which four-digit code operates your
once. The mode key will blink
equipment. For example, to find out
which code is operating your TV:
four times confirming unlock.
1.
Turn on your TV.
4.
If desired, repeat steps 1 to 3 (of
this section) for each device that
2.
On the remote control, press TV
you want volume to be unlocked.
once. Then press and hold Setup
until the TV key blinks twice, then
5.
Now, after you select a device that
has volume unlocked (e.g., AUX),
release Setup.
pressing VOL+, VOL-, or Mute, will
3.
Enter 9 - 9 - 0. The TV key will
control the device' s volume only
blink twice.
in its own mode.
4.
To view the code for the first digit,
Unlocking All Volume Controls
press 1 once. Wait 3 seconds and
(Global Volume Unlock):
count the number of times the TV
key blinks (e.g., 3 blinks = 3) and
1.
Press and hold Setup until the
write down the number in the
selected mode key blinks twice,
leftmost TV Code box (at end of
then release Setup.
this section).
2.
Enter 9 - 9 - 3 and then press
NOTE: If a code digit is "0", the select-
VOL+ once. The mode key will
ed mode key will not blink.
blink four times confirming
unlock.
5.
Repeat step 4 three more times for
the remaining digits. Use 2 for the
3.
Now, volume controls for all
second digit, 3 for the third digit,
devices can be independently
and 4 for the fourth digit. Finish
controlled in their own modes.
writing down the code in the TV
Code boxes (at end of this sec-
tion).
Locking Volume Control To TV or
Re-Activating Channel Control Lock
AUX Mode:
1.
On the remote control, press
Cable once. Then press and hold
1.
Press and hold SETUP until the
Setup until the Cable key blinks
Red light flashes twice, then
twice, then release Setup.
release SETUP.
2.
Enter 9 - 7 - 3. Press CH+ once.
2.
Enter 9 - 9 - 3 (Red light will flash
The Cable key will blink twice.
twice).
3.
Now, regardless if you select the
3.
Press and release either TV or AUX
(Red light for selected device will
TV or Cable mode, only the chan-
flash twice).
nel control capability of your
cable box will be accessible.
REASSIGNING DEVICE KEYS
TROUBLESHOOTING
The Comcast Custom 3-Device universal
remote control can be set up to control
PROBLEM: A mode key does not
a second device.
blink when you press
a key.
For example, to have the unit control a
TV, a Cable Box, and second TV, you
SOLUTION: Replace the batteries with
will need to reassign the unused AUX
two (2) new AA batteries.
key to operate the second TV as fol-
PROBLEM: During programming, a
lows:
mode key displays one
1.
On the remote control, press AUX
long blink.
once. Then press and hold Setup
SOLUTION: An invalid entry has
until the AUX key blinks twice,
occurred. Check the key
then release Setup.
to be entered and try
2.
Enter 9 - 9 - 2. The AUX key will
programming again.
blink twice.
PROBLEM: A mode key blinks when
3.
Press TV once, then press AUX
you press a key, but home
once. The AUX key will blink
entertainment compo-
twice.
nent does not respond.
4.
The AUX key is now ready to be
SOLUTION: Make sure the remote
programmed for your second TV.
control is aimed at your
See Programming Device Control
home entertainment
for instructions.
device and is not farther
than 15 feet away.
PROBLEM: The remote control does
PROGRAMMING CHANNEL
not control home enter-
CONTROL LOCK
tainment devices or the
commands are not work-
By default, the remote control' s chan-
ing properly.
nel-control capabilities are locked to the
SOLUTION: Try all listed codes for
Cable Box. The affected keys are 0 ~ 9,
the device brands being
CH+, CH-, Enter, and Last.
set up. Make sure they
This will guarantee that you do not
can be operated with an
inadvertently change a channel while in
infrared remote control.
the TV mode. However, you can turn
PROBLEM: CH+, CH-, and Last
off this feature to allow full access to
do not work for your
these keys in the TV and Cable modes.
RCA TV.
NOTE: This feature does not affect the AUX
SOLUTION: Due to RCA design
mode.
(1983-1987), only the
De-Activating Channel Control Lock
original remote control
will operate these func
1.
On the remote control, press
tions.
Cable once. Then press and hold
Setup until the Cable key blinks
PROBLEM: Changing channels does
twice, then release Setup.
not work properly.
2.
Enter 9 - 7 - 3. Press CH- once.
SOLUTION: If original remote control
The Cable key will blink four
required pressing Enter
times.
to change channels, also
press Enter on this
3.
Now, the remote control will
remote control after
provide TV or cable channel
entering the channel
control capabilities while in the
number.
TV or Cable mode.