Comcast ON DEMAND M1067A 사용자 설명서
{카테고리_이름} Comcast ON DEMAND M1067A에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Comcast ON DEMAND M1067A 2 페이지. Comcast dvr 3-device universal remote user guide
페이지 인쇄
FEATURES AND FUNCTIONS
Use the remote control' s mode keys
(i.e., AUX, TV, or Cable) to control a spe-
cific device. When pressed, the selected
Comcast Custom DVR 3-Device
mode key will light, confirming your
Universal Remote Control
choice. Use the other keys to perform
desired actions (see the following key
chart).
NOTE: The selected mode will remain active
until you press another mode key.
Press AUX, TV, or Cable
once to select and
control a device.
Press Power once to
turn on or off the
selected home enter-
tainment device.
Use Setup for all
programming
sequences.
Press All On once to
turn on or off all
programmed devices
in this order: Cable,
TV, and AUX. After all
devices are on, Cable
is the active mode.
Press ON DEMAND once
to access Comcast' s ON
DEMAND menu (not
available in all areas).
User Guide
In the AUX or TV mode,
use the transport keys
to control a VCR,
OVERVIEW
PVR, or DVD player.
To record a program
The Comcast Custom DVR 3-Device
on a VCR, press REC
universal remote will control up to
twice.
three home entertainment devices,
In the Cable mode, use
including a Digital Video Recorder
the keys to control ON
enabled Cable Box (used by Comcast
DEMAND programs.
Systems).
Press REPLAY to replay
The remote control requires installing
the previous few
two (2) new AA batteries (included)
seconds of a program.
and some easy programming to con-
trol your devices. For best results,
Press My DVR to show
a list of programs that
please read and perform all instruc-
have been recorded.
tions listed here. Also, keep this guide
for future reference.
Press LIVE to return to
watching live TV.
Use A, B, or C to access
INSTALLING BATTERIES
interactive program
guide functions on
1.
Pull back the remote control' s
your Scientific Atlanta
battery cover and remove it.
Explorer, Pioneer
2.
Insert the two (2) supplied AA
Voyager, or PACE
batteries according to the + and -
cable box.
marks in the battery case.
Use Page+ (or Page–)
3.
Push the battery cover back into
to page up (or down)
place.
through menu screens
4.
Test the unit by pressing any
and the interactive
mode key (i.e., AUX, TV, or Cable).
program guide.
If batteries are inserted correctly,
Use Guide to display
the selected mode key will light.
the interactive
program guide.
NOTE: When the batteries need to be
replaced, the remote control will stop work-
Use these keys to move
ing. Replace the old batteries and the unit
the cursor in the inter-
will be restored to its full functionality, com-
active program guide
plete with your favorite settings.
and menu screens.
Use OK (Select)to select
menu options, PPV
events, and programs
from the interactive
Use PIP Move to move
the picture to different
program guide.
positions in the main
Use Info to display
picture.
current channel and
program information.
Use PIP CH + (or CH -)
to select the next high-
Use Menu to display
er or lower PIP
the Quick Menu (on a
channel.
Motorola, GI, or
Jerrold Cable Box), or
to access settings (on a
PROGRAMMING DEVICE
Scientific Atlanta
Explorer, Pioneer
CONTROL
Voyager, or PACE
The Comcast Custom 3-Device univer-
cable box).
sal remote control is preprogrammed at
Use Exit to exit the
the factory to operate the Cable Box
menu or guide.
supplied by your Comcast system, an
RCA TV, and an RCA VCR (in the AUX
Use Help to access
mode). To control devices other than
digital cable help.
default brands (excluding the Cable
Use Last to recall the
Box), perform the below steps; other-
last channel or go back
wise skip this section:
one screen in the menu.
1.
Turn on a device (e.g., VCR or DVD
Use VOL+ (or VOL-)
Player) and, if applicable, insert
to raise (or lower) the
media, (e.g., video cassette or disc).
sound volume. Also
NOTE: Please read steps 2 to 6 complete-
see Changing Volume
ly before proceeding. Highlight or write
Lock.
down the codes and device you wish to
Press Mute once to
program before moving on to step 2.
turn sound off or on.
2.
On the remote control, press a
In the Cable mode,
device key once (i.e., AUX or TV).
press FAV once to
AUX
NOTE: Use the
key to program
display programmed
control of an Audio Amplifier or
favorite cable channels.
Receiver, a DVD Player, a Home-
Use CH+ (or CH-) to
Theater-In-A-Box Device, a PVR (or
select the next higher
DVR), or a VCR.
(or lower) channel.
3.
Press and hold Setup until the
When controlling a
selected mode key blinks twice,
DVD player, use CH+
then release Setup.
(or CH-) to skip for-
4.
Locate the code for your device in
ward (or skip reverse)
Manufacturer' s Codes on the back
through video.
of this user guide. Brands are list-
ed in alphabetical order with the
most popular codes listed first.
Use the keypad (0 ~ 9)
to directly select the
5.
Enter the first four-digit code for
channels (e.g., 09 or
your device. If you perform this
031).
procedure correctly, the selected
mode key will blink twice.
In the TV mode, use
NOTE: If you enter an invalid code, the
this key to switch the
selected mode key will display one long
TV' s input to view TV
blink and exit the programming mode.
or video programs.
Repeat steps 2 to 5 with a valid code.
In the AUX mode, use
6.
Aim the remote control at your
this key to switch the
device and press Power once. The
VCR, PVR (or DVR),
device should turn off. If it does
or DVD player to view
not respond, repeat steps 2 to 6,
TV or video. For an
trying each code listed for your
audio device, use it to
brand until you find one that
switch to an input
works. If it still does not work, try
source.
Searching For Your Code.
Use Enter to enter
NOTE: If the device does not have a
channels on some TV
Power
key, press the
(
Play
) key.
models or information
7.
For future reference, write your
on menu screens.
device code in the appropriate
Press PIP On-Off to
boxes below:
display the PIP
AUX Code:
Window.
>Use PIP Swap to
switch the images and
sound between the
Device Type:______________
main and window pic-
tures.
TV Code:
second digit, 3 for the third digit,
and 4 for the fourth digit. Finish
writing down the code in the TV
Code boxes (at end of this section).
8.
Repeat steps 1 to 7 for another
6.
To check another device code,
device you want to control.
repeat steps 1 to 5, but substitute
the AUX key for the auxiliary
device you are checking. Write
SEARCHING FOR YOUR CODE
down the codes in the appropriate
boxes below:
If your home entertainment device does
AUX Code:
not respond to the remote control after
trying all of the codes listed for your
brand, or if your brand is not listed at all,
try searching for your code.
For example, after trying all of the
Device Type:______________
codes for your TV, you still cannot get
TV Code:
the remote control to operate your TV,
then:
1.
Turn on your TV.
2.
On the remote control, press TV
once. Then press and hold Setup
CHANGING VOLUME LOCK
until the TV key blinks twice, then
release Setup.
The Comcast Custom 3-Device universal
3.
Enter 9 - 9 - 1. The TV key will
remote control is set at the factory to
blink twice.
control the TV volume in all modes.
4.
Aim the remote control at the the
However, you may change the Volume
TV and slowly alternate between
Lock setting to Individual Volume
pressing Power and TV.
Unlock to unlock a specific device' s vol-
ume controls for independent opera-
Stop when the TV turns off. A
tion in its own mode (e.g., Audio
working code has been found.
Receiver volume controls in the AUX
NOTE: In the search mode, the
mode).
remote control will send IR codes
Or, if desired, you can perform Global
from its library to the selected device,
Volume Unlock so that the volume
starting with the most popular code
controls of all devices can be indepen-
first.
dently operated in their own modes.
5.
Press Setup once to lock in the
Unlocking Volume Control For A
code.The TV key will blink twice.
Single Device (Individual Volume
6.
To search for the codes of another
Unlock):
device, repeat steps 1 to 5, but
substitute the AUX key for the aux-
1.
Press a desired mode key where
iliary device you are searching for.
you want volume to be unlocked
(e.g., AUX) and controlled within
its own mode.
CHECKING THE CODES
2.
Press and hold Setup until the
selected mode key blinks twice,
If you have set up the remote control
then release Setup.
using the Searching For Your Code
procedure, you may need to find out
3.
Enter 9 - 9 - 3 and then press VOL-
which four-digit code is operating your
once. The mode key will blink
equipment. Perform the following steps
four times confirming unlock.
after setting up your devices to find out
4.
If desired, repeat steps 1 to 3 (of
which four-digit code operates your
this section) for each device that
equipment. For example, to find out
you want volume to be unlocked.
which code is operating your TV:
5.
Now, after you select a device that
1.
Turn on your TV.
has volume unlocked (e.g., AUX),
2.
On the remote control, press TV
pressing VOL+, VOL-, or Mute, will
once. Then press and hold Setup
control the device' s volume only
until the TV key blinks twice, then
in its own mode.
release Setup.
3.
Enter 9 - 9 - 0. The TV key will
Unlocking All Volume Controls
blink twice.
(Global Volume Unlock):
4.
To view the code for the first digit,
1.
Press and hold Setup until the
press 1 once. Wait 3 seconds and
selected mode key blinks twice,
count the number of times the TV
then release Setup.
key blinks (e.g., 3 blinks = 3) and
write down the number in the
2.
Enter 9 - 9 - 3 and then press
leftmost TV Code box (at end of
VOL+ once. The mode key will
this section).
blink four times confirming
unlock.
NOTE: If a code digit is "0", the select-
3.
Now, volume controls for all
ed mode key will not blink.
devices can be independently
5.
Repeat step 4 three more times for
controlled in their own modes.
the remaining digits. Use 2 for the
Locking Volume Control To TV or
twice, then release Setup.
AUX Mode:
2.
Enter 9 - 7 - 3. Press CH+ once.
The Cable key will blink twice.
1.
Press and hold SETUP until the
Red light flashes twice, then
3.
Now, regardless if you select the
release SETUP.
TV or Cable mode, only the chan-
nel control capability of your
2.
Enter 9 - 9 - 3 (Red light will flash
cable box will be accessible.
twice).
3.
Press and release either TV or AUX
TROUBLESHOOTING
(Red light for selected device will
flash twice).
PROBLEM: A mode key does not blink
when you press a key.
SOLUTION: Replace the batteries with
REASSIGNING DEVICE KEYS
two (2) new AA batteries.
The Comcast Custom 3-Device universal
PROBLEM: During programming, a
remote control can be set up to control
mode key displays one
a second device.
long blink.
For example, to have the unit control a
SOLUTION: An invalid entry has
TV, a Cable Box, and second TV, you
occurred. Check the key
will need to reassign the unused AUX
to be entered and try
key to operate the second TV as fol-
programming again.
lows:
PROBLEM: A mode key blinks when
you press a key, but home
1.
On the remote control, press AUX
entertainment compo-
once. Then press and hold Setup
nent does not respond.
until the AUX key blinks twice,
then release Setup.
SOLUTION: Make sure the remote
control is aimed at your
2.
Enter 9 - 9 - 2. The AUX key will
home entertainment
blink twice.
device and is not farther
3.
Press TV once, then press AUX
than 15 feet away.
once. The AUX key will blink
PROBLEM: The remote control does
twice.
not control home enter-
4.
The AUX key is now ready to be
tainment devices or the
programmed for your second TV.
commands are not work-
See Programming Device Control
ing properly.
for instructions.
SOLUTION: Try all listed codes for
the device brands being
set up. Make sure they
PROGRAMMING CHANNEL
can be operated with an
infrared remote control.
CONTROL LOCK
PROBLEM: CH+, CH-, and Last do not
By default, the remote control' s chan-
work for your RCA TV.
nel-control capabilities are locked to the
SOLUTION: Due to RCA design
Cable Box. The affected keys are 0 ~ 9,
(1983–1987), only the
CH+, CH-, Enter, and Last.
original remote control
This will guarantee that you do not
will operate these
inadvertently change a channel while in
functions.
the TV mode. However, you can turn
PROBLEM: Changing channels does
off this feature to allow full access to
not work properly.
these keys in the TV and Cable modes.
SOLUTION:
If original remote control
NOTE: This feature does not affect the
AUX
required pressing Enter
mode.
to change channels, also
press Enter on this
De-Activating Channel Control Lock
remote control after
entering the channel
1.
On the remote control, press
number.
Cable once. Then press and hold
Setup until the Cable key blinks
twice, then release Setup.
2.
Enter 9 - 7 - 3. Press CH- once.
The Cable key will blink four
times.
3.
Now, the remote control will
provide TV or cable channel
control capabilities while in the
TV or Cable mode.
Re-Activating Channel Control Lock
1.
On the remote control, press
Cable once. Then press and hold
Setup until the Cable key blinks