Follett FS100A 설치 매뉴얼 - 페이지 13

{카테고리_이름} Follett FS100A에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Follett FS100A 20 페이지. Ice and water dispenser

Maintenance/Cleaning Mode

Cleaning Mode (Dispensing Disabled) - Use when cleaning surface

Entering Cleaning Mode disables the User Interface and allows you to clean

the outside of the dispenser without accidentally dispensing ice.

1. To enter Cleaning Mode, press and immediately release the

maintenance/clean switch (Fig. 11.1) so that only "ICE" displays in

the user interface (Fig. 11.2).

2. To exit Cleaning Mode, press and immediately release the

maintenance/clean switch so that the ice icon also displays in the

user interface.

Maintenance Mode (All Operations Disabled) - Use when cleaning

ice machine

Entering Maintenance Mode disables all operations and allows you to safely

clean and/or sanitize the ice machine and dispenser.

1. To enter Maintenance Mode, press and hold the maintenance/

clean switch (Fig. 11.3) until

(Fig. 11.4).

2. To exit Maintenance Mode, press and hold the maintenance/clean

switch until

Note: Entering and exiting Maintenance Mode will reset the six-month

periodic maintenance reminder.

Accessing Internal Components

CAUTION!

Except for routine cleaning and sanitizing, only qualified

technicians should attempt to service or maintain this equipment.

1. Press and hold the maintenance/clean switch (Fig. 11.1) until

displays in the user interface (Fig. 11.2).

2. Remove (unscrew) chrome ice dispenser chute (Fig. 12.1).

3. Remove the drip tray (Fig. 12.2).

4. Remove the two screws (Fig. 12.3) on the front panel (behind the

drip tray).

5. Remove and set aside the front panel (Fig. 12.4). Do not

disengage the plug on the back of the User Interface.

displays in the user interface

no longer displays in the user interface.

Fig. 11

Fig. 12

Dispenser and Ice Machine - 115 V, 230 V, 220 V