AmpliVox S1270 빠른 시작 매뉴얼

{카테고리_이름} AmpliVox S1270에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. AmpliVox S1270 2 페이지. Power horn
AmpliVox S1270에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (2 페이지)

Thank you for purchasing

AmpliVox S1270 - POWER HORN

We encourage you to visit our website

www.ampli.com to register your product for its war-

ranty coverage, sign up to receive our newsletter,

download our catalog, and learn more about the

complete line of AmpliVox audio visual products,

including portable PA systems, and lecterns.

INSTALLATION INSTRUCTIONS

· Adjustment: The S1270 is constructed with a pivoting, cast

iron base. Loosen the wing nut connecting the base to the

horn and remove the base.

With a screwdriver, loosen the screw on the back of the

speaker if you wish to rotate the horn between vertical and

horizontal positions. Tighten the screw securely when the

desired position is reached.

· Base: The base contains 3 holes for screws (not included).

Use screws with greater than 1/4" diameter head to ensure

safe installation. Screw the base to the mounting surface

where you wish to install horn.

Reattach the horn to the base, rotate the horn to your de-

sired angle and tighten the wing nut securely.

· Wiring: To aid weatherproofing, the wire connections are

sealed internally, and accessible through a 20" lead.

Connect the White (positive) and Black (negative/ground)

wires to the corresponding 8 ohm outputs on your amplifier.

If you wish to use the tamper loop functionality, connect the

Red and Green wires to the appropriate circuit in your alarm

system. If the circuit is broken, an alarm can be triggered.

This is normally closed (NC) circuit

IF YOU HAVE ANY QUESTIONS OR PROBLEMS PLEASE CALL

OUR CUSTOMER SERVICE DEPARTMENT AT 1-800-267-5486

SPECIFICATIONS:

Frequency Response: 200 Hz—15 kHz

Max Power Handling: 100W

Sensitivity:

Impedance:

Size: 6" W x 10 7/8" H x 8 3/8" D

Weatherproof ABS construction

124 dB, 1W / 1M

8 Ohms