Comco AccuFlo AF10-CE 매뉴얼 - 페이지 4

{카테고리_이름} Comco AccuFlo AF10-CE에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Comco AccuFlo AF10-CE 14 페이지.

1. Place the ComfortGrip handpiece inside the work chamber.

2. Place the open end of the vent hose into the back of the workstation or into the dust

collector hose.

3. Connect the power cord and the blast control cable.

4. Connect the air supply to the "Air In" fitting (using ¼" tubing provided in the accessory kit.)

TO NOZZLE(S)

THE ABRASIVE HOSE FROM THE

POWDERGATE VALVE RUNS DIRECTLY

TO THE NOZZLE.

 DO NOT ROUTE THIS HOSE

THROUGH THE VENT PINCH!

1. Remove the tank cover.

2. Fill the tank with powder. Do not fill

above the top of bypass tube.

3. Replace the tank cover and secure (only

¾ turn required).

1‐818‐841‐5500

Make Connections

Add Abrasive

INLET AIR FITTING

VENT HOSE

IS ROUTED

THROUGH

THE VENT

PINCH