COMCRAFT 100UTP Portable 사용자 설명서 - 페이지 5

{카테고리_이름} COMCRAFT 100UTP Portable에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. COMCRAFT 100UTP Portable 8 페이지. Single port 10/100utp tap

w w w . l a n - w a n - t a p . c o m

Page 5

2.5 Power Failure

The uninterrupted link in the network guarantees permanent

network connectivity, also when power fails. Redundant

powering guarantees maximum uptime of the monitor ports.

No data is passed to the TAP ports at power failure.

a. Power the unit using the 12V PSU, the Power LED lights

b. Connect it into the network using Category 5 UTP cables.

Network Port A : to DCE by straight Cable / to DTE by cross-over cable.

Network Port B : to DTE by straight Cable / to DCE by cross-over cable.

TAP port A and B : to analyzer through straight cables (pins 3/6 active).

The maximum distance between any of the connected devices is 90mtr.

TAP port A mirrors data received in Port A, TAP port B mirrors data

received in Port B.