Amprobe ACD-10 PRO 사용 설명서 - 페이지 9

{카테고리_이름} Amprobe ACD-10 PRO에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Amprobe ACD-10 PRO 17 페이지.

Ω Resistance, and

Inputs are made through the test leads terminals. Slide-switch on defaults at Ω. Press

SELECT button momentarily to select

checking wiring connections and operation of switches. A continuous beep tone

indicates a complete wire.

Diode test function

Inputs are made through the test leads terminals. Slide-switch on defaults at Ω. Press

SELECT button momentarily 2 times to select

voltage drop (forward biased) for a good silicon diode is between 0.400V to 0.900V. A

reading higher than that indicates a leaky diode (defective). A zero reading indicates a

shorted diode (defective). An OL indicates an open diode (defective). Reverse the test

leads connections (reverse biased) across the diode. The digital display shows OL if the

diode is good. Any other readings indicate the diode is resistive or shorted (defective).

Capacitance function

Inputs are made through the test leads terminals. Slide-switch on defaults at Ω. Press

SELECT button momentarily 3 times to select

mode can be used to zero out the parasitic capacitance of the leads and the internal

protection circuitry of the meter when measuring low capacitance in the order of Pico

Farad (pF).

CAUTION

Discharge capacitors before making any measurement. Large value capacitors should

be discharged through an appropriate resistance load.

Continuity functions

Continuity function which is convenient for

Diode test function. Normal forward

Capacitance function. Relative zero