Amprobe ACD-15 Pro 사용자 설명서 - 페이지 11

{카테고리_이름} Amprobe ACD-15 Pro에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Amprobe ACD-15 Pro 20 페이지. Clamp-on multimeter series

AutoTect

mode

Set the slide-switch function selector to the

AutoTect

feature automatically selects measurement function of DCV, ACV or

Resistance (Ω) based on the input via the test leads.

• With no input, the meter displays "Auto" when it is ready.

• With no voltage signal but a resistance below 6MΩ is present, the meter

displays the resistance value. When below 25Ω (0.025kΩ) is present, the meter

also gives a continuity beep tone.

• When a signal above the threshold of +1.5 VDC, -1 VDC or 2 VAC up to the

rated 600V is present, the meter displays the voltage value in appropriate DC

or AC, whichever larger in peak magnitude.

• Overload-Alert Feature: When above rated 600V is present, the meter displays

"OL" with a warning beep tone for over-range indication. Disconnect the test

leads from the signal immediately to avoid hazards.

position. This innovative