Follett REF Series 설치 및 서비스 매뉴얼 - 페이지 4

{카테고리_이름} Follett REF Series에 대한 설치 및 서비스 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Follett REF Series 16 페이지. Undercounter refrigerator
Follett REF Series에 대해서도 마찬가지입니다: 설치 및 서비스 매뉴얼 (20 페이지)

페이지 인쇄

Installation

Installing legs – required

1. Remove legs from plastic bag packed inside refrigerator.

2. Tip refrigerator back and screw legs in all the way to stop (they will

extend 1/8" below base of REF).

3. Adjust legs as needed to level REF in both directions. To access legs,

remove the lower front panel. Turn legs clockwise to extend legs.

Installing shelves – required

1. Remove shelves and shelf brackets packed inside refrigerator.

(If ordered, fi nd cut-out upper shelf accessory in separate box.)

2. Install shelf brackets in pilasters (insert top tab, squeeze and push in

lower tab).

3. If ordered, position cut-out upper shelf accessory below evaporator

with cut-out around drain.

Changing temperature controller settings – optional

Follett's temperature controller is pre-programmed with a 34 F set point

and °F display. The 34° set point delivers a temperature range of 34 F –

38 F that may not meet the needs of your specifi c application. Follett's

controller set point can be changed to deliver the required range in either

°F or °C. Refer to page 6 for instructions on changing set point and/or

display to °C.

Fig. 1

Fig. 2

Fig. 3