Follett REF1 설치, 운영 및 서비스 매뉴얼 - 페이지 6

{카테고리_이름} Follett REF1에 대한 설치, 운영 및 서비스 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Follett REF1 19 페이지. High-performance compact refrigerators

Reversing the Door Swing - Optional

CAUTION!

When reinstalling hinge screws, 242 blue Loctite* MUST be applied to screws. Torque screws to 25 in-lbs.

1. Use fl at screwdriver to carefully remove hinge covers. Care

should be taken to avoid scratching chrome cover or refrigerator

body (Fig. 3.1).

2. Support door and remove screws attaching hinge to refrigerator

cabinet (Fig. 3.2).

3. Remove plugs from opposite side of unit and cover hinge screw

holes.

4. Remove screws holding lock strike-bracket at "bottom" inside of

door (Fig. 4.1).

5. Remove plugs from inside of door "top" and install bracket.

6. Plug "bottom" holes with retained plugs and install lock strike-

bracket to "top" inside of door (Fig. 4.2).

Reverse door 180° so that lock strike-bracket is on the bottom

inside of door (Fig. 4.3).

8. Apply 242 blue Loctite* to hinge screws, reinstall screws

(torqued to 25 in-lbs) (Fig. 5.1) and replace hinge covers

(Fig. 5.2).

*Loctite is a registered trademark of Henkel Corporation in the United States and other countries.

REF1/REF2 Compact Refrigerators

Fig. 3

Fig. 4

Fig. 5