Follett REFNAT5-GD 설치 매뉴얼 - 페이지 12

{카테고리_이름} Follett REFNAT5-GD에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Follett REFNAT5-GD 17 페이지.

Troubleshooting

If the unit malfunctions, check the following potential causes before calling for service. In the case of inadequate

refrigeration or freezing, transfer the stored items to another refrigerator before checking.

Refrigerator is too warm

Refrigerator alarm is on

Moisture collects on the outside

Refrigerator is noisy

There is an odor in the refrigerator

REFNAT5-SD, REFNAT5-GD

Adjust temperature control.

Make sure door is closed properly.

Check if ambient temperature is too high.

Check if door gasket is not damaged or has foreign substances

preventing from closing the door adequately.

On start-up of the unit:

The temperature in the unit does not match the set value on control

panel.

On use:

Check if door has not been left opened for a long period of time.

Frequent door openings in highly humid conditions can cause this.

Reduce door openings and reduce time door is open.

Make sure door seal is tight.

Make sure cabinet is level, not touching a wall or other surface, and

rests squarely on the floor on all four corners.

Normal noises include refrigerant gurgling as it passes through

tubes and the compressor clicking on and off.

Check to ensure the items stored are not causing the odor. Clean

interior.