Follett Symphony REF Series 설치, 운영 및 서비스 매뉴얼 - 페이지 5

{카테고리_이름} Follett Symphony REF Series에 대한 설치, 운영 및 서비스 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Follett Symphony REF Series 16 페이지. Undercounter refrigerator

Leveling the refrigerator

Internal stabilizing legs are provided to level the refrigerator in its final location. These legs are retracted for

shipping. To allow the refrigerator to slide easily during installation the stabilizing legs can be extended to clear

the bottom of the refrigerator panels.

To access the stabilizing legs, remove the lower front panel. Turn the legs clockwise to lower and

counterclockwise to raise.

The epoxy-coated wire shelves may be adjusted in .5" increments.

1. Remove shelf.

2. Remove each shelf bracket by applying pressure and lifting bottom tab up and out of pilaster.

3. Insert each shelf bracket in new location by inserting top curved tab and applying pressure while inserting

lower tab.

4. Reinsert shelf.

Reversing the door swing – optional

1. Remove screws and latch from refrigerator cabinet. (Fig. 1.1).

2. Use flat screwdriver to carefully remove (do not scratch) hinge covers (Fig. 2.1).

3. Support door and remove screws attaching hinge to refrigerator cabinet (Fig. 2.2).

4. Cover hinge screw holes with screw hole plugs removed from opposite side.

5. Reverse door and reinstall hinge screws.

6. Reinstall latch on opposite side.

7. Remove screws and handle from door (Fig. 3.1).

8. Rotate handle (Fig. 3.2).

9. Reinstall handle screws (application of 242 blue Loctite

Fig. 1

Installation

Fig. 2

to handle screws recommended).

Fig. 3