Follett Advantage FZRADV25-LB 작동 및 서비스 매뉴얼 - 페이지 7
{카테고리_이름} Follett Advantage FZRADV25-LB에 대한 작동 및 서비스 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Follett Advantage FZRADV25-LB 20 페이지.
Controller Operation
In normal operation, the controller will display temperature in degrees Celsius. To change from Celsius to
Fahrenheit requires a programming key. Contact Vector Products Parts Department at 1-855-686-5592 for
part numbers and pricing.
CAUTION! Follett Products LLC does not authorize changing any critical operating parameters
as it can cause improper system operation and/or severe mechanical damage.Changing
operating parameters may result in Follett Products LLC voiding equipment warranty.
Freezers are pre-programmed with a –25 C (–13 F) set point . If desired, the freezer's set point can be adjusted
within a –25 C to –10 C (–13 F to 14 F) range
All set points have a +2 C (+3 .6 F) differential (r0 setting on the controller) . The 2 .2 C (3 .6 F) differential means that
with a 4 C (39 .2 F) set point, the compressor will turn off at 4 C (39 .2 F) and turn on when it reaches 6 C (42 .8 F) .
It is important to understand that the set point equals the compressor cut out .
Follett Advantage FZRADV25-LB Freezers
7