Follett D18495 설치, 운영 및 서비스 매뉴얼 - 페이지 4

{카테고리_이름} Follett D18495에 대한 설치, 운영 및 서비스 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Follett D18495 20 페이지. Undercounter freezer

Installation

Installing legs – required

Remove legs from plastic bag packed inside freezer.

Tip freezer back and screw legs in all the way to stop (they will extend 1/8"

(3.175mm) below base of freezer).

3. Adjust legs as needed to level freezer in both directions. To access legs,

remove the lower front panel. Turn legs clockwise to extend legs.

Installation shelves – required

Remove shelves and shelf brackets packed inside freezer.

2. Install shelf brackets in pilasters (insert top tab, squeeze and push in lower

tab).

Changing temperature controller settings – optional

Follett's temperature controller is pre-programmed with a -25 C (-13 F) set point

and degrees C display. The -25 C (-13 F) set point delivers a temperature range

of -23 to -25 C (-9 to -13 F).

Follett's controller set point can be changed to deliver up to a -15 C (+5 F)

temperature for applications where a lower temperature is not desired (i.e. ice

cream). See page 6 to change controller settings.

Installation

Fig. 1

Fig. 2

Fig. 3

FZR Series 00939124R00