Follett 110CT425A 설치 매뉴얼 - 페이지 5

{카테고리_이름} Follett 110CT425A에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Follett 110CT425A 17 페이지. Ice and water dispenser

Fig. 1 – Rear connections, freestanding models

12.25 " (31.2 cm)

4.75 " (11.9 cm)

4.5 " (11.4 cm)

3.75 " (9.3 cm)

2.75 " (6.8 cm)

10. Remove top front cover by removing two screws at bottom corners of cover. Lift cover slightly and pull

forward.

11. If dispenser is equipped with SensorSAFE remove protective plastic coating from dispense sensor labels.

12. Turn on dispenser power and bin signal rocker switches. Check dispenser and ice machine operation.

13. Clean ice machine according to instructions in the Cleaning section. Discard ice made during cleaning

process.

14. Turn off ice machine bin signal switch.

15. Remove dispenser hopper lid; clean dispenser according to instructions.

16. Turn ice machine bin signal switch on and replace front covers, securing with screws.

access panel

3/4" MPT drain

3/8" FPT condenser inlet location

3/8" FPT

(water-cooled only)

water inlet

3/8" FPT condenser outlet location

(water-cooled only)

9.62" (24.4 cm)

3/4" MPT ice machine drain location

power cord

NEMA 5-15

31.5" (80 cm)

14" (35.7 cm)

12.38" (31.4 cm)

110CT425A/W, 110FB425A/W

33.75" (85.8 cm)