Amprobe TMA40 사용자 설명서 - 페이지 6
{카테고리_이름} Amprobe TMA40에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Amprobe TMA40 14 페이지. Airflow anemometer
페이지 인쇄
INTRODUCTION
This meter is designed with three measurement modes:
1.
Single point measurement
2.
Multiple points measurement (Manual record)
3.
Automatic logging
•
Measuring/programming anywhere at any time
•
User friendly interface
•
RS232 cable and software enable to link with pC for downloading and uploading
•
backlight function
•
Tripod mountable for long time use
•
power off time selectable
•
big dot matrix lCd
•
powered by 4-pcs AAA batteries or 9V adaptor (not included) (plug: outer:5.5mm;
inner:2.1mm; Center positive) 0.05mA minimum
UNPACKING AND INSPECTION
Your shipping carton should include:
1 x TMA40 Airflow Anemometer
4 x AAA battery
1 x RS232 Cable
1 x Cd download Suite
1 x Carrying case
OPERATION
Meter setting: SET (See Fig.2)
•
press f4 to enter the meter setting
•
press
or
key to shift the cursor
•
press ediT to enter modification mode
•
press nexT/bACK to enter the next or previous page.
•
press exiT to return to main menu.
Meter Screen Description (See Figs 2&3)
1.
lCd Cont.(1-5): lCd brightness. from darkest 1 to brightest 5.
2.
Auto off: Selectable 1 to 20 minutes.
3.
Set clock: Choose date and time. press ediT to enter the month. press nexT to accept or
AboRT to cancel. Repeat for day, year, hour, minute and second.
4.
Set id: press ediT to enable or disable id.
5