Amprobe WT-70 사용자 설명서 - 페이지 13

{카테고리_이름} Amprobe WT-70에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Amprobe WT-70 20 페이지. Orp meter

P5.0: READY indication (rdy)

Use this program to activate "READY" indication. "READY" icon appears

on LCD when the measured reading is stable. While in P5.0, press "ENTER"

to go into P5.1 and press "" or "" to switch Ready indicator ON or OFF

and then press "ENTER" to confirm. (Fig. 6)

Fig. 6

P6.0: TEMPERATURE UNIT (U)

Use this program to select the temperature unit. To display temperature,

extra temperature sensor (TPK-60) is needed. While in P6.0, press "ENTER"

to go into P6.1 and press "" or "" to switch C or F and then press

"ENTER" to confirm. (Fig. 7)

P7.0: REAL TIME CLOCK (rtc)

In P7.0, press "ENTER" to go through P7.1 to P7.6 for date and time settings.

Y-M-D and H:M:S will show in turn and corresponding digits will be flashing

for further change. Press "" to increase and "" to decrease the numbers

and press "ENTER"key to confirm every setting.

P8.0: Reset (rSt)

While in P8.0, press "ENTER"to go into P8.1. Select "n"-No or "y"-Yes with

""or "" for data reset to factory default. Press "ENTER"to confirm

selection.

Fig. 7